Safe-Home.com

Healthier Living | Child Safety | Eco Friendly Tips

Control Dust Mite Allergies from Beds with Allergy Proof Encasements on Pillow and Mattresses

by Barbara 30. January 2010 09:41

Question abou the Restguard  King Sized Mattress Cover and the King allergy pillow covers.

Q: "We have a pillow top king bed that is less than a year old. My allergies to dust mites are getting worse. We change the sheets once a week, wash all the blankets and quilt once a month and run an air cleaner and use a HEPA air cleaner. Would these mattress and pillow covers help?" Thanks. Linda

Answer: Dust mites love the warmth and moisture your body provides while you are sleeping on a mattress with your head on a pillow. Their favorite food is dander (human skin flakes). The advantage of using Restguard covers is that dust mite populations cannot multiply in the mattress or pillows due to the polyurethane backing. Yet the cotton/poly terry surface is comfortable and cool to sleep on. Plus your pillow is made allergy proof if you prefer feathers or down to which many are allergic. You'll protect your pillow and bedding against stains as well.

And you can launder the covers as often as you choose since they have a 10 year warranty and are hot water safe for your washer and low dryer setting or line dry safe. You may need to wash them weekly if your allergies are severe. We wash ours every few weeks when we wash the blankets and comforter to get rid of dust mites and animal hair. (Yep, the cats and dog share the bed despite my allergies.)

I do suggest, from personal experience, that you put the pillow cases on with the non-zippered side first. It is easier. We put our Restguard mattress cover over a memory foam pad to protect it from the animals and us.  The memory foam pad units two extra long twins in a king frame: much easier to flip a twin than a king mattress over.

Thanks again for your question. Remember that mattress covers and encasements as well as pillow covers and encasements from RestGuard come in sizes from crib to California King.

Sincerely,

Barbara

 

Residential Automatic Natural or Propane Gas Shut Off Valves to Replace CCI Controls Units

by Barbara 30. January 2010 08:09

Question about the Scentry III GFRAB Propane/Natural Gas Home Gas Detector.

Q: "Our oil burning furnace was replaced with a propane gas furnace. Our concern is gas leaks while we away, i.e. we want protection against explosions and fires. The CCI Controls gas valve system is no longer made. How does this unit work? What components do we need? Thanks. Jim."

Answer: The Scentry III GFRAB propane/natural gas detector is only one component of this home safety system. To have a complete system, you need these additional components:

  • The Scentry III Gas Valve Controller
  • The Battery Back Up in case there is a power failure.
  • A compatible gas valve such as this .75 inch that is CSA (AGA/CGA) Certificate number 229521-1656058 Australian Gas Association Certificate number 4235,UL Recognized File Number MH5939.
  • Optional: Remote Gas Sensors. Up to 5 remote explosive gas sensors can be monitored by the Scentry III GFRAB unit.

The compatible valves are in .5, .75 and 1 inch sizes. Each valve is an electrically operated gas shut off valve that opens and closes on a demand signal from a thermostat or other controlling device. Can be used with both natural gas and LP gas at pressures up to 0.5 psi. The White Rodgers replacement is a compression spring closing and soft seat construction gas valve.

The advantage of this system is that the controller unit supports up to 5 calibrated remote sensors.

Scentry III-GFRAB Specifications:

  • Case: ABS Plastic
  • Physical Size: 7.6 inches by 4.6 inches
  • Weight: 2.25 lbs
  • Color: Gray
  • Power consumption: 1.5va
  • Supports up to 5 calibrated remote sensors (not included)
  • Requires Scentry III-GVD gas valve (purchase separately)
  • Supports Battery Back-Up (Not Included)
  • Supports Gas Valve Controller for Explosive Gas (Not Included)
  • Connections: screw terminals
  • Input Power: 115VAC, 60 Hz
  • Output Control Relays: 2 amps,
  • 24 VAC Alarm Signal
  • Output: 12V DC @500 ma
  • Reset: manual
  • Sensor Type: Tin Dioxide Semiconductor
  • Alarm Points: Propane (LP) <5200 PPM Alarm Points: Natural Gas / Methane <12,200 PPM
  • Manufactured Proudly in the USA for Safety First USA, Inc.
  • Warranty: 1 year from date of purchase.

Thanks for your question. Just remember propane gas and natural gas are safe sources of energy if you add protective measures including alarms, shut off valves and regular maintenance of the appliances that use gas.

Sincerely,

Barbara