Safe-Home.com

Healthier Living | Child Safety | Eco Friendly Tips

Bird-X Irri-Tape and Tanglefoot Bird Repeller Ribbon Bird Control Products for Backyard Pool

by Barbara 30. June 2012 09:29

Question about bird control products for swimming pool areas and boat docks.

Q: "Birds keep pooping in my swimming pool.  What easy to install products are there to get rid of pest birds? Thanks. Tim."

If you have trees or poles around your swimming pool, the best inexpensive bird control products are the bird repellent ribbons.

My suggestions are:

The Tanglefoot repeller ribbon is 2 inches wide and 100 feet long. It also keeps deer away. This bird repeller ribbon makes an audible sound when the wind moves it plus the sun hits the ribbon and causes it to appear like a flashing light. Cut into 2 to 3 feet lengths and use twine to attach to tree branches, post, etc. Let it hang freely and replace when sun bleached.

The Bird-X Holograhpic Irri-Tape is made of 2 mil polyester ribbon imprinted with a holographic pattern of interlocking circles. The pattern resembles owl eyes, the natural predator of many birds. This is a 3 dimensional image that reflects all the spectrum colors with laser-like intensity. The visual deterrent also is perceived as a ripple pattern. Even the slightest breeze produces a fierce metallic-sounding "rattle" plus you can install it like a physical barrier. For that install in a linear fashion along a ledge, fence, etc. to deter birds from their "landing strips." Support brackets are included for installation. You can use several different patterns. For example, the maypole would need 12 or more lengths on the 2 inch by 2 inch fence post. For orchards, you can wrap the tree by spiraling the Irri-Tape around it from bottom to top. Or you can add cross stips to the main lengths of Irri-tape to make a streamer applicaton.

If you have a railing around the pool, you can also attach the streamers there.

For additional effectiveness, add "scarecrow" devices such as the < ahref="http://www.safehomeproducts.com/shp2/product/terror-eyes-moving-eye-holographic-bird-repeller-ball/visual-scare-devices/93/93.aspx"> Terror Eyes Moving Eye Holographic Bird Repeller Ball or the Tanglefoot Inflatable Birdchaser Balloon, Yellow. The "eyes" on these devices scare away birds. The BirdChaser ball has streamers. The Terror Eyes is mounted on a support that helps it bounce around even with little wind.

If these are not effective, then you need to consider a battery powered or electric bird repeller device. The BalconyGard by Bird-X uses either batteries or AC to keep birds away. It is weatherproof. Or target a particular bird types with a Bird-X Peller Pro1 Pigeon Sonic Bird Repeller which also gets rid of starlings, sparrows and seagulls.

Feel free to contact us if you have more questions. Sales@safehomeproducts.com is the best contact address.

Thanks for your question.

Sincerely,

Barbara

Rain Gauge Options to Know When to Water Lawns and Gardens

by Barbara 29. June 2012 10:48

Question about how to choose a rain gauge.

Q:"I want to use a rain gauge to know when to water my lawn and gardens. What are my choices? I plan to check the water after each rain shower and watering. Thanks. Tim."

Answer: Tim, you have some decisions to make. There are simple rain gauges, ornate rain gages and rain gauges with digital read-outs.

  • How much do you want to spend?
  • How large or how much capacity for water do you need?
  • Do you want to empty the gauge or have it empty itself?
  • Do you want a rain gauge that adds interest to your garden?
  • Would your needs be best served by several rain gauge units as opposed to a single one?

These are some of the more popular rain gauges sold by Safe Home:

  1. The P3 International Rain Gauge, Self-Empties,Digital Clock/Readout has an easily viewed LCD readout. Displays current rainfall up to 9.99" and accumulated rainfall up to 99.9" for intervals of 1hr, 24hrs, 7 days, and 30 days.Resolution: 0.03" per inch of rain. Use one AA battery. Quite inexpensive.
  2. The Acu-Rite Rain Gauge Wireless Monitor has a monitor arm set in increments of .5 inches. Enhanced wireless sensor transmission. Three rainfall modes. Self-emptying. Measures in inches and millimeters.
  3. The Vermont Estate Rain Gauge Brass, 26 Inches Tall by Conant Brass measures up to 12 inches of rain in 1/10 inch increments. The stainless steel insert is highly visible with bold black numerals that will last forever. The solid brass drain valve at the bottom makes emptying easy. The collection funnel features a brass screen to keep out unwanted leaves and bugs. Exclusive design uses the convex shape of the glass when filled with water to magnify the numerals by 50%. 26 inches tall by 2.5 inches in diameter. Model CCBVRG8.
  4. The Conant Custom Brass Jeffersonian Rain Gauge is a classy rain gauge that turns into the wind to get the most accurate measurement of rain up to 5 inches in 1/5 inch increments.
  5. The Ancient Graffiti Leaf Rain Gauge Copperplated holds up to 5 inches and is decorative as is the Ancient Graffiti Flower Rain Gauge If you use the less expensive ones like these, you can place them in several places in your yard or garden and more easily keep track of how much water those areas get.

Please visit our website to get more ideas. We have numerous types of rain gages.

Thanks for your question.

Sincerely,

Barbara

 

Tags: , , , , , , , ,

environmental monitor | rain gage | rain gauge | rain guage

Kirks Original Coco Castile Soap, An Ideal Soap for Campers Using Hard Water

by Barbara 23. June 2012 08:51

Q: "We go camping in the wilderness and in campgrounds. The water is alway hard. We are looking for a soap that lathers in hard water, even cold water and is not full of chemicals that could harm the environment.  Is Kirk's Original Castile Soap our best option?" Thanks from Janet.

Answer: Yes. we recommend Kirk's castile soap for campers and for anyone concerned about both the environment and the health of their skin. Kirks is a very mild soap made from all natural ingredients without any chemicals or animal fats. Because of its high glycerine content, Kirks lathers generously in hard water and in any water. You just get more suds with soft water. Kirks melts very slowly. A cake can last a long time. Each 4 ounce soap bar is approximately 3.75 inches long by 2.5 inches wide by 15/16 inches thick (measured with wrapping on.) We sell in 3 bar packs because we can offer it to you at a better price. Plus the shipping cost for 3 bars is about the same as for a single one!

We sell Kirks in cases of 48 bars, half cases of 24 bars, 1/4 cases of 12 bars and in individual bars as well. Most people buy a half or quarter case as the price and shipping costs per bar are more reasonable.

Those people with chronic skin conditions such as from exposure to Agent Orange rate Kirks Castile very highly. My late father is why we sell Kirk's soaps. When local supermarkets no longer sold Kirk's, Dad urged us to sell it. Dad's ceramic tile soap dish was so small that he always cut the bar in two. We've been selling Kirks since 2000. There is a very light fragrance to the soap: this is a natural one. The soap colors may vary slightly: several plants make the soap using the same formula yet the color is sometimes a little different.

If you have other questions, please contact us. Thanks again for your question.

Sincerely,
Barbara

Tags: , , , , , , , , , ,

bar soap | castile soap | natural soap | soaps

MiracleAir PM400 Air Cleaner for Home or Office Made in USA for Dirt, Gas, Odor and Virus Removal

by Barbara 20. June 2012 10:13

Question about the Black MiracleAir PM 400 portable HEPA air filter and air purifier for home or office use.

Q: "Where is this unit made? Why is it better than similar units? I work in an environment where desks are packed tightly into small cubicles. Although there is a no smoking policy, there is odor from some co-workers who smoke. Of course in the winter, there is coughing and sneezing from colds. Our office is in a manufacturing plant so things can get dirty fast. Thanks. Bill."

Answer: The advantages of this Black MiracleAir PM 400 or the Miracle Air PM400 White HEPA Air Filter Units are that they are made for heavy duty use for years and years. Plus they are made in the USA in Minnesota so a purchase supports the USA economy.

 There are three stages with the Miracle Air, which cleans and sanitizes the air by trapping pollutants, allergens, dust and other particles with a true HEPA filter. We are talking about 99.97% @ .3μ with 82 sq. ft. of surface area. Add to that powerful odor control capabilities utilizing 15 lbs. of activated charcoal plus optimal airflow in all conditions with the infinitely variable speed motor/blower. The is a completely portable and easy to move air purifier that has four heavy duty casters included.

Here are the technical specifications

  • AIRFLOW: 0-400 CFM* infinitely variable speed control
  • PREFILTER: Impregnated carbon prefilter
  • HEPA FILTER: True HEPA with 82 sq. ft. of filtration area
  • ODOR CONTROL: 15 pounds activated carbon. Other blends available.
  • FAN/MOTOR: Dynamically balanced precision-built motor/blower for smooth vibration-free operation
  • SOUND LEVEL: At 3 meters, 64 dBA on high, 35 dBA on low
  • POWER CONSUMPTION: 250 Watts at maximum airflow
  • VOLTAGE REQUIRED: 120 Volts, 2 amps, 60Hz or 240 Volts, 1 amp, 50/60Hz (special order)
  • SIZE: 15.6 W x 15.6 D x 22.5 H
  • WEIGHT: 49 lbs, Approximate shipping weight 57 lbs.
  • HOUSING FINISH: Durable powder-coated enamel finish
  • Limited Warranty - Air Quality Engineering, Inc. warrants this equipment against manufacturer’s defects in parts and workmanship for three full years.

Te MiracleAir™ is seems expensive compared to many brands seen at the big box stores. It is both affordable and low maintenance when you consider that this large true HEPA filter that doesn’t require frequent replacement. That means compared to other HEPA units, the MiracleAir™ has four times the media for filter life and can last sixteen times longer than the competition. Plus,
with its dynamically balanced external rotor motor, you enjoy quiet, smooth operation, so you barely know it’s there.

As Air Quality Engineering points out:

Air Quality Engineering’s MiracleAir is a residential air cleaner designed for home and provides 4 stages of air filtration to address these indoor air pollutants:

  • Medical ImagePrefilter – coarse particulate prefilter removes larger airborne contaminants that would otherwise result in prematurely shortened primary filter life.
  • HEPA – Surgical grade 99.97% HEPA air filtration ensures maximum particulate filtration efficiency.
  • Granular activated carbon – Most activated carbon available in  residential air cleaners on the market. 15 pounds of actual activated carbon! This removes gases, vapors, VOCs and other harmful non-particulates from your home.

When you do need replacement parts, the HEPA, Pre-filter, etc. are all USA made and of the highest quality.

  • MiracleAir Carbon/Potassium Permanganate Filterremoves odors, gases, chemical, toxins and vapors (i.e. formaldehyde, benzene, toluene, xylene, etc.). Carbon potassium permanganate air filters need to be inspected and replaced annually. Replace every 1 to 5 years depending on the environment where the Miracle Air PM-400 is used. Each filter contains 12 pounds of activated carbon and 3 pounds of alumina potassium permanganate
  • Miracle Air PM-400 Replacement Carbon Pre-Filter is sn impregnated, activated carbon pre-filter that traps large particles like dust and pet hairs, protecting the HEPA filter and extending its life. Change this activated carbon impregnated prefilter every 4 to 6 months. Protect the HEPA and carbon potassium permanganate filter cartridges. Carbon pre-filter size is 14" x 15" x 60".
  • Replacement HEPA Filter for Miracle Air PM-400is a MERV 17. Replace HEPA filter according to amount of dust or dirt in the room. Inspect at least every 6 months. Always replace this air filter if you turn the unit off for three days or more as the moisture in the filter can breed bacteria. Quantity of Filter Media: 82 Square feet of hospital grade HEPA media.Efficiency: 99.97% efficient at .3 microns.

Thank you for your questions. Also consider requesting your company install the Safe Home Air Filters in their HVAC system and return air grilles if that is possible. Those will help with dirt, dust, allergen and odor control.

Sincerely,

Barbara

 

 

Babinski, Taylor, Buck,Troemner, Queen and Other Reflex Hammers Compared

by Barbara 19. June 2012 14:17

Question about the types of reflex hammers for neurological testing and how they are used.

Q: "What differs among the various types of percussion hammers used to test reflexes? Why does a doctor need so many? Thanks. Tim."

Answer: From the WIKI, I have abstracted this information about the major types of reflex hammers. Thank you WIKI for your help! I did the best I could, Tim. I was unable to learn why a doctor needs so many hammers.

  • The Taylor reflex hammer or tomahawk reflex hammer was designed by John Madison Taylor in 1888. This is the most commonly used in the USA. The triangular rubber component is attached to a flat metal hammer. The traditional Taylor hammer is significantly lighter weight as compared to heavier European hammers.
  • The Queen Square reflex hammer was designed and named for the now National Hospital for Neurology and Neurosurgery) in Queen Square London. Originally it was made with a bamboo or cane handle averaging 25 to 40 centimetres, attached to a 5 centimetre metal disk with a plastic bumper. Currently, the Queen Square hammer is usually made using plastic molds. This is still the favorite of  neurologists in the UK.
  • The Babinski reflex hammer designed by Joseph Babinski in 1912 looks like the Queen Square hammer except for a metallic handle often detachable. Babinski hammers often are telescoping for easier storage.
  • The Troemner reflex hammer was designed by Ernst Trömner. This percussion hammer looks like a two-headed mallet. The larger mallet is for testing tendon stretch reflexes. The smaller mallet is used to elicit percussion mytonia.
  • The Buck Hammer is a dual mallet-type hammer designed for attaining myotatic and cutaneous responses. The head is outfitted with a large and small mallet made of soft TPR. The chrome-plated brass handle is precisely balanced for increased control of force. An integrated pointed tip is included in the head for pinprick cutaneous reflex testing.
  • Combination Babinski Buck Hammer has a Babinski-Tip, dual-mallet buck percussor, screw-in pointed-tip and retractable brush.
  • Riester Dejerine Reflex Hammer,No Needle 8.26 In.
  • Berliner Percussion Hammer weighs just 3 ounces with a stainless steel handle, is 7.87 inches long and is used for reflex testing.

If you click on the links, you'll be able to get more information about some of the reflex hammers sold by Safe Home Products. We sell percussion hammers by major manufacturers such as Riester, MDF Instruments, Medline and Graham Field Health. These neurological hammers range from the inexpensive to those that are gold plated.

Thank you for your question. I learned a lot as well!

Sincerely,

Barbara

Safety Tip: Increase Warehouse and Industrial Safety with Edge Pads on Sharp Edges

by Barbara 19. June 2012 04:16

Question about Kids Edge Cushion Pad Large Profile 2 3/8 x 2 3/8 x 36 Inches, Black 100/Case

Q: "Is this the correct product to cover sharp edges of warehouse shelving? Are there other options? Are there corners to match? We need to increase our warehouse safety. Thanks. Sam."

Answer: To choose the correct product or products, first determine the width  or widths you need to cover. Once you have decided that, then choose a color.

For example, the most economical way to purchase the wide edge cushioning is in the 2 3/8 inch x 2 3/8 inch x 36 inch lengths either in boxes of 48 or 100 pieces. That edge padding comes in ivory, gray, taupe , brown and black. Gray and black are currently the more popular colors. If you do not need the width, then the Kids Edge Cushion Padding 1x1 in.YELLOW 100 Ft. with Tape or the Kids Edge Cushion Pad 1 x 1 in. 400 Ft. YELLOW NO TAPE that you attach with adhesive from a caulking gun. Both products come in brown, gray, ivory and black as well.

There are corners to match each width of edge pad. Custom sized corners are available as well.

Another option is more expensive. That is to use the Boing Skin Urethane Corner Cushion Strips which are wider and a little longer. The favorite for warehouses is the Boing Yellow Corner Cushions each of which measures approximately 39.4 inches long by 2.25" x 2.25" x 1/2" thick. Each strip is made from skinned urethane foam which gives it more resilience.

Thank you for your question.

Sincerely,

Barbara

IV Wall Hooks Let Patients Carry IV Drip Bags Without Bulky IV Stand

by Barbara 15. June 2012 10:19

Question about IV Wall Hooks.

Q: "I work in a county hospital where we are working to keep down equipment expenditures while making life easier for patients and staff. I see you sell IV wall hooks. Please provide more information. The current portable IV holders we use are heavy, bulky and expensive as well as obstacles for both patients and staff to deal with. Thanks. Sara."

Answer: The inexpensive  IV Hook from Wall Control mounts on the wall near beds, toilets, ect. By using these wall hooks, health care facilities are safer and have more room both for staff and patients to navigate. There is no need, in most situations, for bulky IV holders or IV stands

Use wall mounted hooks to hold IV drips in areas such as bed side, restrooms and Cancer Treatment Clinics.  An ambulatory patient can carry his or her IV drip bag from one IV wall hook to another without pushing or pulling a bulky, cumbersome IV stand. Fewer accidents occur because medical personnel no longer have to trip and stumble around IV stands that always seem in the way. Simplify your medical facility with the IV Hook.

IV Wall Hook Specifications:

  • Wall Mount: 3.5 inches tall by 2 inches wide.
  • Made of steel that is powder coated white.
  • IV Hook: Stainless steel. Swivels in wall mount. 9 inch reach.
  • Mounting Supplies: Wall mount mounts with 2 #12 screws each is 1.25 inches long. Sheet rock anchors included.
  • Made in USA.
  • Quantity: 1 assembly per package.

Thank you for your question.

Sincerely,

Barbara

Differences Between Bird-X Structural Bird Netting, Standard Bird Net and Knotted Polyethylene Bird Net

by Barbara 15. June 2012 06:17

Question about the differences between Bird Net Structural 1/2 In. Black Mesh 200 Ft x 14 Ft and Bird Net Standard 3/4 In. Black Mesh 100 Ft x 14 Ft.

Q: "What are the differences between the two types of Bird-X bird netting? I'm not sure which would be better for my application. Thanks Tim."

Answer: The main differences are in the size of the mesh openings, the strength, the flexibility and the weight.

Structural bird net from Bird-X:                           Standard bird netting from Bird-X

Mesh openings: 1/2 Inch                                    Mesh opening: 3/4 Inch

Strength: 8.5 psf (pounds/square foot)                Strength: 2.5 psf (pounds/square foot)

Both are black, UV protected, plastic, barely noticeable. The standard is more commonly used by home gardeners and the structural by vineyards, construction companies, farmers, etc.

There is also a third type, Bird Net PE Plus Premium Grade Knotted ¾ In. Polyethylene 25x50 Ft. This is preferred for orchards or commercial settings where you may want to keep out small animals as well as birds and bats. Because it is knotted, there is stretch to it and it drapes more easily. The mesh openings are 3/4 inch.

If you have questions, please direct them to sales@safehomeproducts.com. These bird nettings come in several sizes.

Thank you for your question.

Sincerely,

Barbara

Chain Fire Ladders or Emergency Ladders for 2nd thru 6th Stories, Made in USA Safety Products

by Barbara 8. June 2012 07:09

Question about Made in USA escape ladders

Q: "I manage a residence for abused women. Our building is 6 stories high. We do have some fire escapes. However, many of the bedrooms are not near the fire escapes. We are looking for ladders that can be kept under a bed or in a closet for emergency escape in case there is a fire. We prefer to Buy American. Which ladders do you suggest we purchase? Thanks. Beth."

Answer: We recommend the Bold Ladders which are made in the USA by Bold Industries. There are 12 foot, 20 foot, 35 foot and 50 foot ladders.

  • Quickescape 12 foot ladders. Weight: about 15 lbs. Choose from a QuickEscape QFL12SL Emergency Ladder With Sleeves, 12FT or a QuickEscape QFL 12 Emergency Chain Ladder, 12FT without plastic sleeve covering. Note: plastic covering helps to reduce the possibility of tangling. The 12 foot ladder is an Emergency Escape Ladder For the 2nd Floor. The QuickEscape® Emergency Escape Ladder hooks over a window sill for quick escape when other exits are blocked. Place the ladder hooks over the window sill and climb down the ladder to safety.  A portable ladder, the Quickescape ladders are tested to support over 1000 lbs.and fit standard windowsill walls up to 10" thick. There are easy to install or remove standoffs for each rung: standoffs give more stability while allowing flexibility to avoid a variety of wall obstructions or hazards. For example, if there is a lower floor window located directly below the designated egress (escape) window and the path of deployed escape ladder will goe along that wall. For this situation, prepare the ladder in advance by removing the standoffs that would hit the window, thus avoiding breaking the glass. The ladder is made from 18 gauge steel with a 2/0 double loop chain in red and gray. There is a life time warranty.
  • Quickescape 20 foot emergency escape ladders. Weight: about 22 lbs. Each ladder is identical in construction to the Quickescape 12 foot ladders. The difference is that this ladder is made for escape from a 3rd story. Choose either the Quickescape with plastic covering of the chains or the Bold QuickEscape Fire Ladder, No Sleeves, 20FT with plain chains.
  • ResQLadder® Emergency Escape Ladder, 35 feet long. Weight is about 24 lbs. This fire ladder is made for escapes from the 4th floor. Red and white in color, the gauge of the ladder is 18 gauge and 20 gauge. Again the ladder supports up to 1000 lbs. total and has removable stand-offs. Choose from a 35 Ft ResQLadder® Emergency Escape Ladder with plastic covering the chains or Bold FL35 Res Q Ladder, No Chain Sleeves, 35 Feet.
  • ResQLadder® Emergency Escape Ladder, 50 feet long. Weight is about 38 lbs.  This ladder is made for escapes from the 5th through 6th floor. Red and white in color, the gauge of the ladder is 18 gauge and 20 gauge. Again the ladder supports up to 1000 lbs. total and has removable stand-offs. Choose from a 50 Ft ResQLadder® Emergency Escape Ladder with no covering the chains or a 50 Ft ResQLadder® Emergency Escape Ladder with plastic on the chains. Plastic sleeves mean less likelihood of the chain tangling during deployment and more comfortable climbing down.

Remember that along with having escape ladders available, you need to have fire exits marked as well as the locations of the ladders marked. Smoke hoods are often recommended for those who are in rooms without windows with direct access to those with fire ladders. Install and regularly test smoke alarms.

Note: Due to Liability Issues This Product is Returnable Only In Event of a Defect Verified by the Manufacturer.

Thank you for your question. We do discount larger quantities of ladders, smoke hoods and most of our products.

Sincerely,

Barbara

 

Replace Recalled Unsafe Evac-U8 or Out-Of-Date Smoke Hoods on Yachts, Ships, Planes, Etc.

by Barbara 2. June 2012 04:11

Question about smoke and fire hoods.

Q:"The expiration dates on our yacht's smoke hoods are 2010. The units are Evac-u8. When I phoned, your customer service person told me that Evac-u8 were recalled years ago because of problems. Seals were leaking so the Evac-u8 units caused moisture absorption in the chemicals that were to save your life! What units replace them?

Answer: Please choose a smoke hood depending upon your needs. For example, the Safe Escape Fire and Smoke Hood ASE30A, Hard Case give 30 minutes escape time from smoke or fire. The ASE 30 or ASE 60 in hard cases can be mounted on the wall. The Safe Escape Fire Smoke Hood ASE60A Hard Case 60 min give up to 60 minutes escape time.

If you prefer a smoke hood that keeps the user safe from more chemicals and gases, select the Safe Escape Chem Bio Smoke Fire Gas Escape Hood 60BR-HC  that provides respiratory, head and eye protection to facilitate evacuation from hazardous fire and toxic gas atmospheres. Every vehicle, office, and home should have one of these for each person to protect against explosion, chemical spills, smoke inhalation, or toxic fumes. The ASE60BR in the hard case meets rquirements of EN403-2004, EN 153-2000, EN 14387-2004, EN 14941-1998 a, EN 12942L: 1998 and Q (HJ)GA01-2003.


The 60BR-HC has 5 part system also protects against:

  • GREEN: Sarin, Hydrocyanic Acid, Hydrogen Arsenide, Phosgene, Diphosgene, Chlorpicrin, Pestmaster, Dichloromethane, Hydrogen Chloride (HCL), Lewsite Gas, Mustard Gas, Sarin, Benzene
  • RED: Benzene, Chlorine, Acetone, Alcohol Class, Aniline Class, Carbon Disulphide, Carbon Tetrachloride, Chloroform, Methyl Bromide, Chlorotoluene, Nitroalkaline, Chlorpicrin, Ammonia Gas, Suphur Dioxide, Chlorine Gas, Hydrogen Sulphide, Oxides of Nitrogen, Phosgene, Phosphorate or Chlorine organoagricultural chemicals.
  • WHITE: Carbon Monoxide (CO)
  • PURPLE: Radioaerosol, Bacteria aerosol, Other Toxic Smoke, Fog, Dust 

Safe Home also sells specialized units that not only are smoke and fire hoods but also are oxygen generating self-rescue devices. The Safe Escape Oxygen Generating Self Rescue Respirator Hard Case 10/CS contains 10 units at a reduced price over a single unit.

Safe Escape HFZY30EEBD-HC Oxygen Generating Self-Rescue Respirator Features:

  • Self-contained oxygen generation for 30 to 60 minutes
  • SGS certified
  • PVC hood withstands temperatures up to 1000 degrees Celcius.
  • Hood color is orange
  • ABS Plastic Hard Case with Clam Shell Design
  • Case:8.5 X 4.25 X 5.5 inches
  • Weight: approx. 5 lbs. in Case
  • WARRANTY: All products have a 5 year Shelf Life from the Date of Manufacture.

FREE ONE TIME REPLACEMENT ( Excluding ANY & ALL applicable Shipping Costs / Taxes or Duties)Should you use it in an actual Documented Case where Fire / Smoke are or / were present where-upon these units were used to facilitate escape or while awaiting rescue during the 4 or 5 years. Product should be returned to Distributor or Ourselves along with a Official Report from Law Enforcement / Fire / Civil Defense / Military Authorities in order to verify its usage in an actual situation where Smoke and / or Fire were present. We will replace them Once During the 5 Year Shelf Life. For Government Agencies / Departments no more than once a year with proper documentation supporting their claim and the return to us of the used unit along with documentation / official police / fire report. You will also be able to order this Special Custom Colored product for SWAT, DEA, FBI agencies and other Military & Police agencies in BLACK or Army Green or Desert Sand Color in other parts of the World Army Green, Sand or Black Colored Hoods also have same color filter to conceal recognition. We also place SWAT, DEA, FBI, POLICE Loges on the Front of the Airbag and Rear of the Hood for Identification.

The HFZY30 is exactly the same unit. However it comes in an ABS Plastic Case with CLAM-Shell Design for quick and easy access to be used in Office Buildings or above deck in staterooms on ships or areas above deck or for use in confined areas on Oil Platforms and built-in wall mount for affixing to any hard surface.

Safe Home also sells the Safe Escape Oxygen Generating Respirator Compact Steel Case This unit is meant for wearing on one's belt or mounted nearby in mines, ship engine rooms, etc.


SafeEscape tm ASE20B/ZH20B Portable Stainless Steel Cased Self-Rescue Oxygen Generating Respirator for Miners, Refineries, etc. Technical Data:

  • Service Life in Movement: Duration in minutes according to MT425-1995 (breath rate of 45L/min. >20 minutes
  • Service Life at Rest: Duration according to MT425-1995 30L/min
  • Oxygen Concentration of Inhaled Air: >21%
  • Carbon Dioxide Concentration of Inhaled Air : <3%
  • No other toxic gas in the inhaled air
  • Temperature of Inhaled Air: <60%
  • Inhalation resistance: <245Pa
  • Mass, Unopened:<1.2Kg
  • Starter conforms to Standard MT425-1995
  • Dimensions: 160mmx 130mmx90mm
  • Expected Service Shelf Life: 5 years stored.
  • Made in China 

To be concise, SafeEscape makes soft case and hard case smoke hoods with 30 minutes and 60 minute use times, soft case and hard case smoke hoods that also filter out toxic gases, and soft case plastic, hard case plastic and steel case oxygen self-generating respirators.

Please contact us for pricing on larger quantities and special colors (minimums of 500 apply for special colors.)

Thank you for your questions.

Sincerely,

Barbara