Safe-Home.com

Healthier Living | Child Safety | Eco Friendly Tips

Furniture Anchors Prevent Dressers and Chests from Injuring or Killing Children

by Barbara 30. June 2016 04:13

Using furniture securing devices to keep children safe from injuries or death from furniture falling onto them.

Q:"36 million chests and dressers were recalled by IKEA on June 29, 2016. According to IKEA, "products meet all mandatory stability requirements in Europe and other parts of the world." U.S. Consumer Product Safety Commission Chairman Elliott Kaye said in a statement on Tuesday that tipped-over furniture or television sets kill a U.S. child every two weeks,How do I keep my children safe? Thanks. Tina

Answer: IKEA furniture is not the only source of such accidents. IKEA is offering free furniture anchors to its customers. Furniture anchors are the best safety device to use. When children pull on dressers in an attempt to open upper drawers or pull out a drawer to climb on, the dresser or chest can easily fall on them. In 2010 or 2011 Consumer Reports recommended ToppleStop furniture and TV straps for securing furniture. Each set of Topple Stops has two straps, one secures to a wall stud on one to the TV set or the stand.

Topple Stops furniture straps attach to the back of solidly set furniture and secure to wall studs behind the furniture. Topple Stops can anchor appliances and furniture that weighs up to 400 lbs. For items that weigh up to 200 lbs. install a minimum of 1 kit with two point attaching. Use two kits or four point attachment for objects that weigh 200 to 400 lbs. Remember that nothing substitutes for parental supervision.

For metal units, attach Topple Stop half with an adhesive pad to a dry surface cleaned with isopropyl alcohol (that gets off any residual grease). Then attach the other half to a wall stud.

For wooden units, the preferred attachment method is using #8 x 1 inch wood screws to attach the fasteners to the frame or the inside edges top or sides of the furniture.

The wall attachment requires using #10 x 2 inch wood screws to the wall studs behind the furniture. If studs are metal, use t-bar anchors to toggle bolts. You can use wall anchors if each has a minimum holding strength of 100 pounds.

Heavy Duty ToppleStop Furniture Fastening System Kit Contents:

  • Two (2) grey Thumb Lock fasteners, 2" long by one wide with 3/4" lock lever. Use with wood screws or 3M VHB adhesive attachment. (Bonding Times: Wait four hours before adding strap. Adhesive fully bonds after 72 hours.)
  • Two (2) 12" long, 3/4" wide grey locking strap with grommet for wood screw attachment.
  • Four (4) #8 x 1" wood screws for furniture attachment    Two (2) #10 x 2" wood screws for wood wall stud attachment.

Thumb lock fastener attaches to locking strap. Fastener can be moved and locked in either direction on the strap. Lift locking lever to "open." Lock fastener on strap by pushing lever down firmly. Note: Thumb Lock adhesive is non-hardening. Fasteners can be removed without damaging surface if slowly and gently pried off with appropriate tool.Suggestion: Install when children are not present, i.e. asleep for the night.

We also recommend Topple Stops for use in day care centers, hotels, motels, etc. to increase safety and reduce liability insurance costs.

Product Performance Warranty: This product does NOT replace child supervision. This product is only intended to help or reduce movement of equipment during jarring movement. It is common understanding that fastened equipment should fare better during jarring movement than equipment that is not fastened, helping to reduce the amount of damage and injury that could result. No warranty can be properly applied to the performance of the products due to the uncertainty of forces generated, and numerous variables involved in a jarring event, or natural disaster. Products that are defective in material and workmanship prior to installation of the product will be replaced. The user or third party installer accepts liability for injury, loss, or damage, direct or consequential, arising from use or misuse or inability to use the product.

Thanks for your question.

Sincerely,

Barbara

Formaldezorb Filter Advantages Over Pure Carbon in VOC Canisters and Furnace Filters

by Barbara 10. June 2016 06:11

Question about Amaircare VOC Canister Filter 8 Inch For Amaircare 2500 Air Cleanersand the Safe Home Duo Air Purify Furnace Filter 20x25x4 In.

Questions: "What advantages are there in adding the Amaircare VOC canister filter to my Amaircare 2500? And why would I use a Safe Home Duo filter with Formaldezorb as my HVAC filter? We are very sensitive to chemicals. Thanks. Mary.

Answer: Both filters use formaldezorb with carbon to capture odors as well as formaldehyde.

Amaircare VOC Canister filters are available for all sizes of Amaircare portable air purifiers as well as many of the industrial ones and HVAC units .Amaircare’s standard VOC Canisters capture approximately 20% aldehydes (including formaldehyde) in a single pass. Amaircare’s Formaldezorb VOC Canister is a proprietary specialty activated solid carbon that is chemically modified on the surface with a compound specifically targeting formaldehyde and other aldehydes. Formaldehyde being the most reactive aldehyde, binds to the surface of the modified carbon in a highly effective manner. Based on this specially formulated process, Amaircare Formaldezorb VOC Canisters remove 60% to 75% of formaldehyde in a single pass. The high performance removal of the Formaldezorb VOC Canister is specified by healthcare professionals in the USA and Canada where exposure to formaldehyde is a current and growing health concern since recognition by the United States Environmental Protection Agency (EPA) as a known carcinogen.

Safe Home Duo HVAC filters come in 1 inch and 4 inch sizes. The one inch sizes have an internal metal frame with self-sealing edges. The four inch ones use pleated filter media: the outside of the filter has sealing strips. Again the idea is to have no unfiltered air go around the filter.

Polyester media filter with chemical filter uses 300 grams/sq. ft. of 50/50 activated carbon and potassium permanganate based FormaldaSorb™ to trap gases, odors and chemicals including formaldehyde, benzene, toluene, ammonia and ozone. No other filters are as effective at removing dust mites, mold spores, pollen, odors, cleaning chemicals, ozone, paint fumes, and common gasses like formaldehyde which triggers asthma and allergies.  Made in USA. Captures up to 95% of common household allergens. Eliminates odors from pets, paint, cooking and more. High density carbon plus advanced compound, FormaldaSorb™, a patented potassium permanganate product, in second layer.

Filter life depends upon how much dust, dirt, chemicals etc are in your interior air. The VOC filter typically lasts 1 year. Furnace filter life is usually 3 months.
We urge that you consult your HVAC technician before purchasing any furnace filter. The Safe Home Duo filters have a MERV 8 rating which works in most newer (as in last 20 years) HVAC systems. If a MERV rating is too high for your unit, air flow is restricted and damage to the furnace may occur.  Go to Safe Home Products.com to see the various filter sizes available for Amaircare and HVAC systems. Just enter Amaircare VOC Filter or Safe Home Duo in the search box on the left.

Thank you for your questions.

Sincerely, Barbara

 

Automatic Water Valve Shuts Offs and Alarms When Washing Machine Leaks

by Barbara 9. June 2016 02:38

Question about the products Washing Machine FloodStop FS3/4H-90 and FloodStop FS-3/4-H Washing Machine,In-Line Auto Water Valves.

Q:"Please tell me how many inches it is from the valve connector to the inside 90 of the device. Please send diagram with measurements if possible. Our valves are located in the back of the box and I have concerns if the valves will protrude past the front cover, plus I want to install water arrestors. Thanks, Jim."

Answer: We checked with the manufacturer's rep as this was beyond our expertise. Bob's response: "I have no diagram available for him, but understand his question.

The distance from the inlet end of the valve where the spinning female threaded collar is to the inside edge of the 90 degree downward outlet end of the valve is 2 9/16 inches (slightly over 2.5 inches). The FloodStop 3/4-H90 was specifically designed for wall box type installations. Numerous wall boxes were evaluated to determine the valve design so it would fit all brands. I cannot remember when someone returned a FloodStop 3/4-H90 because the outlet end of the FS valves did not protrude past the front cover of the wall box. Typically installing water arrestors increases the extension of the FS valves out from the hot and cold water hose-bibs."

FYI: The FloodStop is a dual valved water damage control device that turns off water to a washer machine when the water sensor (placed usually under the machine) senses moisture. The newest model utilizes AC power with a battery backup and has twin ball valves that shut off the water.

For those who have a different system, we do have the straight line version.

Thanks for your question.

Sincerely,
Barbara