Safe-Home.com

Healthier Living | Child Safety | Eco Friendly Tips

Amaircare Car Air Purifiers Remove Dust, Pollen, Exhaust Fumes, Etc. for Easier Breathing

by Barbara 12. July 2012 10:22

Question about allergy air filters for cars.

Q: "We live in LA. Even with the car windows closed and the AC on, we find our allergies active and the air quality poor. What car air purifiers do you suggest that would thoroughly clean the air in an enclosed car or truck. Thanks. Juli."

Answer; If you want an air filtration system, our suggestions are either of the two Amaircare units described below.

Amaircare XR100 Auto Air Filter Purifier w/12V Plug or the Roomaid Amaircare HEPA Air Purifier in Slate.Concerned about VOC's? Buy the Roomaid in Slate color with optional VOC cartridge. Use in your car or truck with the optional 12 Volt DC Auto Cord Kit for Roomaid Air Purifier The Roomaid also comes in Pure White and in Pure White with VOC Cartridge

The Amaircare XR100 is made especially for use in vehicles. There is an optional AC cord package available. The strong points of this unit include:

  • Three Stage Filtration Process: Air is drawn into the top of the unit and filters through a three-stage filter cartridge. Purified air is then discharged in all directions through the screened opening around the circumference of the unit.

        Stage 1: Large particles, odors: Activated carbon 200% impregnated non-woven, fire retardant, polyester filter media.
        Stage 2: Sub-micron particles: Electret charged filter media attracts and holds sub-micron particles in the air such as dust, pollen, cigarette smoke, bacteria, vehicle emissions, etc.
        Stage 3: V.O.C.'s: Air exits the main filter cartridge and passes through a zeolite impregnated non-woven, polyester filter. This final air filtration stage absorbs additional gaseous contaminants. 
  • Amaircare XR-100 has a high efficiency backward-curved motor/blower for 12 volt or 120 volts use (AC-DC adapter is not included.) Filter rate is 20 cubic feet per minute or 1,200 cubic feet per hour. In the typical car, the hourly air turnover is 1000% or up to ten air exchanges hourly. Better quality air occurs with every cycle.
  • Easy to Install. Takes Up Virtually No Space. The Amaircare XR-100 easily mounts to a car seat back with supplied mounting strap.
  • Easy Plug-in Cigarette Lighter Adapter: Adapter has a seven foot cord.
  • Powerful Motor/Fan: Motors are run tested for 35,000 hours of operation.
  • Small and Compact: Use in homes, offices or hotels (with Optional AC adapter).
  • Contemporary Styling: Modern design in dark gray color.

Amaircare Automobile Air Filtration System Specifications:

  • U.L. and C.S.A. Approved.
  • Physical Size: 3.5" High x 8" Diameter
  • Weight: 2.1 pounds. (Shipping weight - 4 lbs.)
  • Motor: Single speed –425mA.
  • Motor/fan housing: 24 gauge steel, Powder coated baked enamel finish.
  • Filter cartridge: injection molded polystyrene
  • Air Flow: 20 cfm .
  • Coverage: 75 to 150 square feet
  • 4.5 watts when AC adapter is used.
  • 10 air changes per hour in a typical automobile.
  • Efficiency: 50.00% efficient at 0.03 microns.
  • Note: Item is returnable only for replacement if defective due to mechanical issues.
        Accessories:
            Cigarette lighter adapter with 7 ft. cord (Included).
            Strap for mounting the unit to the car seat back. (Included).
            120V AC to 12V DC adapter with 7 ft. cord (Optional).
            U.L. and C.S.A. Approved.
            5 year manufacturer's warranty.

The Amaircare Roomaid is much larger. This unit is versatile: can be put on the floor of a car or truck and operated by the optional 12V power converter

Roomaid HEPA Air Filtration System With VOC Features:

  • HEPA Filter lasts two to five years and removes 99.97% of particulate matter.
  • Activated Carbon Filter lasts six months to a year and removes odors and fumes.
  • Optional Auto Adapter Kit allows you to strap the Roomaid air purifier into your car, truck, or RV and plug it into the cigarette lighter and avoid toxic VOC emissions from automobiles.
  • Optional VOC Canister Upgrade for heavy duty removal of chemicals and odors.
  • Energy efficient, affordable, and relatively quiet.
  • Lightweight and portable at only five pounds.
  • Perfect for automobiles, offices, hotel rooms, business trips, and vacations.
  • Integrated Seals at the top and bottom of the Roomaid prevent leaks and ensure that all air gets cleaned.
  • The Roomaid features a contemporary look and a baked enamel finish that is more durable than plastic.
  • Comes with Two Washable Pre-Filters to capture large particles.
  • Optional Annual Filter Kit contains two foam pre-filters and three activated carbon filters.


Roomaid HEPA Air Filtration System with VOC Specifications:


    Class: Portable HEPA Filtration System
    Delivered Airflow: 20-40 CFM (Cubic Feet per Minute)
    Dimensions: 8.5" round, 7.5" high
    Product Weight (lbs): 6 lbs
    Control: 3 position, 2 speed switch
    Power Consumption: 4.5 watts Outflow: 360°
    Colors: Pure White and Slate Gray
    Note: Item is returnable only for replacement if defective due to mechanical issues.

There are replacement filters available for both car air filtration units. The main differences are the size, the weight, the number of speeds, and the type of filters used. The Roomaid uses a true HEPA filter plus a VOC filter. The XR-100 uses a three stage media filter with activated carbon, zeolite and an electret charged filter medi. Prices and filter replacement costs, of course, are different as well.

Thank you for your question. Either unit would reduce allergy symptoms and clean the air in your car. We sell more of the XR-100 units for vehicles because they take up less space and hang on the back of a car seat.

Sincerely,

Barbara


 

What Makes an EnviroSept Furnace Air Filter Panel Better than a Washable One?

by Barbara 25. November 2009 10:07

Question about the Envirosept Electronic Furnace Filter Model 1625.

Q: "Currently I am using disposable furnace filters. I am considering the Envirosept but wonder if this performs any beter than the washable furnace filters. We do have allergies to dust. Thanks." Frank

Answer:  I have two answers, one based upon personal experience here at our Safe Home Products' office and one based upon information from the manufacturer.

At our offices, we have numerous printers plus the dust and dirt that drifts in from the frequent comings and goings into our large warehouse. We tried a fiberglass filter initially and then replaced it with a 1625 Envirosept furnace panel. The amount of dust that collects on desks, monitors, etc. decreased significantly with the Envirosept. We do have to change the filters about every three weeks.  I, too, am allergic to dust plus pollen and more. The EnviroSept keeps the air clean so I'm not sneezing!

Second, the manufacturer, Aqua Air Technologies shares that there is no way to compare the EnviroSept to either the frictional electrostatic filters or the standard fiberglass ones that you throw away. Mike explains that the Envirosept is up to a thousand times more effective under normal operating conditions.  "In theory, the plastic/glass strands are supposed to develop a static electric charge as the air passes through the filter, much like when you comb your hair. However, you need very low humidity to create any type of low level static charge. This charge is quickly lost as soon as the filter collects any dust, which insulates the plastic/glass strands and prevents the generation of any static charge. It would appear that the only benefit these filters offer is that they are permanent. Further, you do have the dirty task of washing these filters every two-three months. In addition, these filters have been known to cause major air restriction problems after several years that may damage your heating/cooling system."

Our unit is 5 years old and we've experienced no problems. The Envirosept units come in many sizes. All the units we sell come with 14 filter pads, enough for most people for at least 1 year.  The power used is minimal and the cost cannot be beat! Changing the filters is easy. Just unplug the panel. Slip it out. Open the clips. Remove the dirty filters, replace into the one inch slot after fastening the clips and plug in. Wipe off the grids with a damp microfiber cloth if necessary and let dry before refilling and replacing.

Thanks for your question.

Sincerely,

Barbara

Maintaining an Amaircare Roomaid HEPA Air Purifier

by Barbara 12. June 2009 09:25

Question about the Roomaid Air Purifier.

Q: "I am interested in purchasing the Roomaid since I understand the unit can be operated both in a motor home or car on a 12VDC power adapter and also on standard AC power. My concern is maintaining the unit. What is involved with that? Do you have any personal experience with the unit? Thanks. Mary

Answer: The Roomaid is made in Canada by Amaircare. I've run a "white" ( it is really cream colored) Roomaid in my home office continuously (except for when I wash the prefilters) for over 9 years. I've changed the HEPA once and the pre-filter maybe 4 times. By the way, I have allergies and have run an Amaircare 3000 continuously in our bedroom for 9 years as well. Original motors still purr along quietly. (German motors.)

Both units are especially needed since Buddy the Siamese cat joined the family a year ago. Since Buddy likes to sleep in his cat bed right next to my monitor, the Roomaid prefilter does pick up a lot of cat hair over the course of a month (don't believe everything you read about Siamese shedding very little). The annual filter kit includes both pre and post filters There is also an optional VOC carbon filter if you are sensitive to formaldehyde or other volatile organic compounds.

To maintain the unit, turn the unit off and wash the prefilters in soapy water, rinse thoroughly and allow to dry. Remember that HEPA filters can become a source of mold or bacterial growth if air does not move through them nearly continuously. Never have an air purifier with a HEPA filter sit idle for more than 3 or 4 days or you need to replace the HEPA.

To change the snap on HEPA replacement filter you just jank a bit (or maybe use a knife for leverage) and pull off the entire top of the unit which is the HEPA. There are 4 or 5 little peg inserts that snap into the bottom of the Roomaid where the motor is. Then push the new unit on and put on the new prefilter. The post filter sits in the middle of the HEPA unit.

You could add a scent to the top of the HEPA unit. There is a little round container for scent. I choose not to since I am allergic to begin with.

For use in the car, there is a seat belt clip included with the optional 12volt power adapter.

In my opinion, there is not a sturdier unit available in this price range. And certainly maintenance is simple as well.

Thanks for your question.

Sincerely, Barbara