Safe-Home.com

Healthier Living | Child Safety | Eco Friendly Tips

Save Money. Prevent Slip & Fall Accidents. Grip On Sale

by Barbara 24. October 2012 05:30

Question about Grip On Gallon Size Anti-Slip Treatment for Tile, Concrete, Marble, etc. Note: due to overstock of the 1 gallon size, price is reduced through December 31, 2013

Q: " How much coverage do you get from a gallon of Grip On? I have an auto dealership with ceramic tiling in the customer waiting room and show room and am concerned about falls in cold weather or rainy weather? How long does this effect last? Thanks. Steve."

Answer:  This one gallon size (128 Oz.) of Grip On treats about 400 square feet. Reduces the potential of personal injuries, lawsuits and litigation, employee days lost and increased insurance costs. The increased coefficient of friction gained when surfaces are treated (not coated) with Grip On® Anti-Slip Solution is a positive proven safety solution for owners of residential and commercial properties and facilities. The invisible "tread" to increases the coefficient of friction by 100% to 500%. Reapply one per year in heavily traffic areas.

Surfaces treated with Grip On® Anti-Slip Solution are automatically skid and slip resistant when wet or moistened. Use Grip On® Anti-Slip Solution on almost all hard surfaces, such as ceramic tile, glazed brick, marble, polished stone, terrazzo, river rock, concrete, and quarry tile.

Grip On®'s Simple Application Instructions:

    Clean and rinse area.
    Pour Grip On™ on surface.
    Mop or sponge area liberally.
    Let stand for 15 to 20 minutes.
    Rinse off with clean water.
    Area is now ready to use.

After treatment, do not wax. Wax fills in the enhanced read created by the Grip On™ treatment. Reapply every 2 years for bath and shower areas. Reapply every year for traffic areas. 

Thanks for your question.

Sincerely,

Barbara

Starting a Safety Proofing Business With Anti-Slip Grip-On Solution for Concrete and Tile Floors

by Barbara 20. September 2011 15:00

Question about Grip On Anti=slip Solution as part of a business to safety proof hard surfaced flooring such as ceramic tile, concrete, etc.

Q: "I recently took an early retirement. I read about Grip On and am interested in starting a safety proofing business for slippery floors. Last week I went to a restaurant with ceramic tile that was slippery. Many times concrete outside malls and stores are slick when it rains. And my own garage floor is dangerous when it gets wet. How difficult is Grip On to apply, what would I need to start a business and how would I know what to charge? Thanks. Frank."

Answer: You didn't mention the state or town where you live. My advice is to learn about local requirements for a business and decide if you want a corporation such as a Chapter S. Seeking advice about that from a business attorney and/or local Chamber of Commerce is a great first step. Once you have your business and insurance in place, then it is time to seek out customers who need hard surfaces such as concrete and tile treated to protect their customers and themselves from slip and fall accidents.

The five gallon buckets are probably the most economical way to start. Each bucket treats about 2000 square feet of flooring. Each bucket weighs 50 lbs. When business improves, purchase the  55 gallon drums of Grip On: you can refill the bucket using a pump.  This 55 gallon size will treat about 22,000 square feet of hard surfaces. Ships by truck only: 4 drums can fit on each skid. Approximate shipping cost: $300 per skid with one drum. The shelf life is indefinite: with a good business, you''ll get through this quantity in weeks or days depending upon the square footage you will be covering. The lid of the drum stays on. There are two holes, one 4 inch hole and one 2 inch hole. Purchase a vacuum or hose pump from your local hardware store. (Cost about $15).

What you will need for faster application in addition to the Grip On are:

  • a 20 lb cotton mop
  • a mop bucket with wringer
  • an 18 inch to 24 inch squeegee
  • a wet vac to make removal of dirty and clean water faster
  • a long extension cord for the wet vac
  • a source of clean water
  • a good cleaning solution with degreaser. 
  • roller ruler to calculate accurately the length and width of areas to be treated in linear feet.
  • a calculator to determine the square feet to be treated (or a pencil and paper and the ability to multiply!)

As far as what to charge, you need to calculate the cost of the Grip On and pre-cleaning solution based upon the square footage of the project. Next you need to determine what your hourly wage should be based upon the local economy, your overhead (insurance, etc.), how you will be paid (check or credit card) and if there is another individual or company providing the same service in your area. You may be able to see public bids for local municipal buildings and see what the winning bids were.  Certainly $1.00 a square foot might be reasonable in a more rural area while in New York City a reasonable charge might be $2.50 to $5.00 a square foot.

Remember what you are selling is safety. Insurance rates for restaurants, malls, etc. are based on many factors including accident rates. The fewer claims for slip and fall accidents the lower rates those companies will pay.

Slip/fall accidents are a major problem for employers and customers as well as homeowners. Just think of what happens to those in the Northern states who don't deice their sidewalks and someone falls and breaks a leg! The statistics about insurance liability claims are that slip/fall accidents rank second after auto accidents claims., And slip/fall accidents, paid for by workers compensation claims, have greatly increased over the last 10 years.

As a general rule of law, according to Grip On's attorneys, if an owner or possessor of a premises knows of a potentially dangerous condition, which could cause harm and he or she knows there is a means to prevent that harm, the inference is that the injured party would be more likely to hold that owner liable and have higher damage claims. Insurance companies don't like accident claims: keeping business insurance is important. When a company is canceled for insurance, other insurance companies are less likely to insure or will significantly increase premiums due to the risks they see in the future.

Do make sure that you ask each customer for his/her permission to use you and your company as a reference. I suggest a website for your area where you can have customers rate your service and make comments about the change that Grip On made for their hard surfaced flooring such as ceramic tile, glazed brick, marble, polished stone, terrazzo, river rock, concrete, and quarry tile.

Do remember that porcelain bathtubs are still fixtures in many homes, hotels and motels. Applying Grip On means no more tub mats, stick on plastic "fish", etc.

Among customer who use GripOn are:Dr. Phil's House,McDonalds Restaurants, Trump Properties Exxon/Mobil, Burger King Restaurants, Tanasaka Power Plant ,Cities of New York & New Jersey ,City of Los Angeles ,Bureau of Engraving US Government ,Life Care Centers of America, G.L. Homes, Covenant Care of America, Manor Care Nursing Center, Darcy Hall Nursing Center, Boca Raton Rehabilitation, Spring House Manor, Elks Lodges of Florida, VA Hospitals, Delray Racquet and Country Club, Residents of Century Villages, Pete's Five Star Corporation, Cambridge Investment (Burger King), McDonald's Corporation, Marriott's Hotel and Assisted Living, 7-11 Stores ,Wolfe's Restaurant ,Carlucci's Restaurant Corporation, Billotti's Restaurant Corporation, Pompano Pizza, Onaisas Coney Island, Shopping Center Markets, Outback Steak Hous.

I hope this information has been helpful.

Thank you for the question.

Sincerely, Barbara

 

Grip On Helps Prevent Falls on Smooth Concrete Floors. Not Effective on Epoxy Coated or Polyaspartic Coated Floors.

by Barbara 25. May 2011 07:36

Question about using Grip On® with a epoxy coated concrete floor or polyaspartic flooring coating.

Q: " I need to put an anti-slip coating on epoxy coated concrete flooring or polyaspartic coated flooring I install. Will Grip On® work?" Thanks. Sam

Answer: I contacted the manufacturer for clarification on this interesting question. The answer is no. For an anti-slip floor, Grip On will not work after epoxy or polyaspartic coatings are applied to concret: the coatings fill the pores. What Grip On anti-slip floor solution does is fill in the pores invisibly to increase the resistance to slipping and falling. So Grip On® would not work in your situation. Also if you paint a concrete floor, the same situation occurs as the paint fills the pores.

One solution to your problem is to add a color dye to the concrete and use a water based xylene sealer: you want nothing to seal the pores of the floor as then it cannot be treated with Grip On®. 

Why does Grip On work? All natural materials such as concrete, ceramic, marble, granite, terrazzo, quarry tile, slate, porcelain tile and bathtubs have natural voids in them. The larger the void, the more the surface of that material is slip resistant. This void creates a tread for you to walk on.  Ceramic or glazed tile, as well as porcelain, are coated to create a shiny finished look to a floor or fixture. These coatings fill in the natural voids up to 70%. When you walk on the dry surface, you would not notice that the voids are filled. But, when the surface is wet, the water fills in the remaining 30% of the void and that is why a floor becomes slippery not allowing any space between the water and the bottom of your foot creating a hydroplane effect. Grip On® microscopically treats the surface of your floor or fixture in a way that brings back the natural void via the treads in the surface material. So, when a floor or bathtub is wet, it still allows you to feel surefooted. Grip On® Anti Slip Solution is a clear, chemical treatment that increases the co-efficient of friction and the safety of the surface when wet.

We sell Grip On® in various sizes from 4 oz bottles to drums. Among the sizes are

We also sell Grip On in a pallet of four 55 gallon barrels. With the drums, the lid stays on. What you do is purchase a vacuum or hose pump from your local hardware store. The lid has one 4 inch hole and one 2 inch hole so you can pump the Grip On out into containers you use for your applicators for spreading.

Grip On®'s Simple Application Instructions:
  1. Clean and rinse area.
  2. Pour Grip On™ on surface.
  3. Mop or sponge area liberally.
  4. Let stand for 15 to 20 minutes.
  5. Rinse off with clean water.
  6. Area is now ready to use.

After treatment, do not wax. Wax fills in the enhanced read created by the Grip On™ treatment. Reapply every 2 years for bath and shower areas. Reapply every year for traffic areas.

Additional Questions and Answers about Grip On®:

Q: How does Grip On® Anti-Slip Solution work?
A: Grip On® Anti-Slip Solution is a process that increases the coefficient of friction on a tile floor or a porcelain bathtub. This is not a coating that can wear off: this is a process that creates a tread design on the mineral surface itself.

Q: Does the treated surface look or feel any different?
A: There is no discernible change in appearance. However, when wet, the feeling is SAFE!

Q: Why is there a need for Grip On® Anti-Slip Solution?
A: Slip/Fall accidents are the nation's #2 accidental killer. Over 9 million disabling injuries every year. Business insurance rates are skyrocketing. Increases of 25% annually are common.

Q: How long is the Grip On® guarantee?
A: 2 years for bathtubs and showers. 1 year for traffic areas.

Q: Is Grip On® Anti-Slip Solution difficult to apply?
A: No, Grip On® is easy to apply. One worker can treat hard surfaces at the rate of 600 square feet per hour, per worker. Bathtubs require less than 10 minutes with no strenuous work.

Q: Does Grip On® Anti-Slip Solution kill germs?
A: The chemical in Grip On® Anti-Slip Solution is known to inhibit bacterial and fungi growth and to kill some bacteria and fungi. Test data is being gathered on germ killing and will be available at a later date.

Q: If my floor is sealed, can I still use Grip On® Anti-Slip Solution?
A: Yes, Grip On® Anti-Slip Solution works through most floor seals and effectively applies the “invisible tread.” Two applications may be required for sealed floors.

Q: What if there is grease on my floor?
A: Grip On® Anti-Slip Solution loosens grease, making it easier to remove any grease on your floor. More than one application may be required. Once again, it may take more than one application. Grip On® Anti-Slip Solution will loosen all hardened grease on your floor.

Q: Can I wax over the Grip On® Anti-Slip Solution?
A: NO. Wax fills in the “invisible tread” that Grip On® Anti-Slip Solution placed on your floor. We recommend a dry buff to bring up the shine.

Q: Is Grip On® Anti-Slip Solution dangerous?
A: The level of danger is similar to household bleach. Similar cautions are on each bottle. Keep out of reach of children. Avoid eye contact. Wear rubber gloves. Use in ventilated area. Can be fatal if swallowed. Do not use on wood, vinyls or plastics

Grip On Anti-Slip Solution Specifications:

  • Use on tile floors, bathtubs, showers and on almost all hard surfaces, such as ceramic tile, glazed brick, marble, polished stone, terrazzo, river rock, concrete, and quarry tile.
  • Coverage:
    • 4 oz. bottle: 12 sq. ft.
    • 16 oz. bottle: 48 sq. ft.
    • Gallon: 400 sq. ft,
    • 5 Gallon Bucket: 2,000 sq. ft.
  • Increases the anti-slip CEF by 100% to 500%.
  • Chemical Name: Hydroxy Acetic Acid.
  • Physical State: Clear yellow, mild odor.
  • pH: 7.6.
  • Caution: Keep out of reach of children. Avoid eye contact. Wear rubber gloves. Use in ventilated area. Can be fatal if swallowed. Do not use on wood, vinyls or plastics.
  • Warranty: 1 year limited manufacturer's warranty on traffic areas; 2 years on bathtubs and showers. If the customer installed Grip On® Anti-Slip Solution, the company will send additional material to the customer at no cost excluding shipping
  • Disclaimer: GRIP ON® ANTI-SLIP SOLUTION helps to reduce the risk of slip/fall accidents, but Safety Seal Products Corp its' agents and representatives do not warrant or guarantee to the customer, or any other person or party, against the Occurrence of slip/falls, or other accidents, personal injury, or property damage of any nature. Accidents and falls may occur on treated areas, notwithstanding its treatment with Grip On® ANTI-SLIP SOLUTION and customer AGREES to indemnify and hold harmless Advanced Floor Care Products and its agents and representatives, free and harmless from any damages, claims, demands or causes of action arising in connection with or brought by anyone allegedly slipping, falling, tripping, or stumbling on treated area.

Grip On Anti-Slip Solution Makes Concrete, Tile, Etc. Slip Resistant, Not for Hands

by Barbara 17. July 2009 07:31

Question about the product 16 oz. Bottle Grip On Anti-Slip Solution SS0016

Q: "Can this be used on fingers/hands?" Carl
Answer: No, Grip-On is not for use on hands. To apply it to ceramic tile, concrete, marble, etc. to increase the coefficient of resistance to slipping, skidding, etc., you should wear rubber gloves or be careful not to get the product on your hands. This product makes slippery floors slip and fall resistant. Plus, the product is easily applied and is invisible. Sounds almost magic and I found it to be! I took the throw rugs out of my ceramic tile floored bathroom. Saved me from slipping and removed a temptation for one dog who prefers not to potty outside when it is raining or snowing or cold!

Below is information from the Material Data Safety Sheet:

  • Chemical Name: Hydroxy Acetic Acid.
  • Physical State: Clear yellow, mild odor.
  • pH: 7.6.
  • Caution: Keep out of reach of children. Avoid eye contact. Wear rubber gloves. Use in ventilated area. Can be fatal if swallowed. Do not use on wood, vinyls or plastics.
  • Our feedback on this product has been completely positive. Applying the solution to my bathroom ceramic tile took only minutes. Since the product is clear and invisible after application, you don't have to worry about applying it "perfectly." I applied it over 3 years ago. It is great to get out of the shower or tub and not worry about hydroplaning with my wet feet.

    Grip On also comes in larger sizes. The 4 oz Grip On bottle will protect up to 12 square feet. The Grip On Gallon Bottle protects up to 400 feet. If you have larger areas such as entrances to malls, hospital floors, hundreds of porcelain bath tubs, etc., I suggest you look at the larger sizes such as the 55 gallon barrel which will treat up to 22,000 square feet or the 5 Gallon Bucket of Grip-On that treats up to 2000 square feet of hard surfaces

    Why does Grip On work? All natural materials such as concrete, ceramic, marble, granite, terrazzo, quarry tile, slate, porcelain tile and bathtubs have natural voids in them. The larger the void, the more the surface of that material is slip resistant. This void creates a tread for you to walk on.  Ceramic or glazed tile, as well as porcelain, are coated to create a shiny finished look to a floor or fixture. These coatings fill in the natural voids up to 70%. When you walk on the dry surface, you would not notice that the voids are filled. But, when the surface is wet, the water fills in the remaining 30% of the void and that is why a floor becomes slippery not allowing any space between the water and the bottom of your foot creating a hydroplane effect. Grip On® microscopically treats the surface of your floor or fixture in a way that brings back the natural void via the treads in the surface material. So, when a floor or bathtub is wet, it still allows you to feel surefooted. Grip On® Anti Slip Solution is a clear, chemical treatment that increases the co-efficient of friction and the safety of the surface when wet.

    Thank you for your question.
    Sincerely, Barbara