Safe-Home.com

Healthier Living | Child Safety | Eco Friendly Tips

Replace Safe-T-Alert RV30-441 Propane Alarm With a Safe-T-Alert 35-741,CO Alarm/Gas Alarm Combo

by Barbara 24. October 2013 06:05

Question about replacements for CCI Controls Propane Alarm 7770.244.

Question: "What 12 Volt RV gas alarm can replace my CCI Controls 7770.244 that is beeping? I also need a new carbon monoxide alarm." Thanks. Steve.

Answer: Safe-T-Alert has two units, the Safe-T-Alert 30-441 and the Safe-T-Alert 35-741. Both are surface mount units.  If you want to add more carbon monoxide detection, I suggest the new combination units, the 35-741 which comes in a black surface mount RV alarm and a white unit. The 30-441, gas only monitor with alarm, comes in brown and white. Both have approximately the same dimensions as the old CCI units.

If your carbon monoxide alarm is hard-wired, please look at these two units, the Safe-T-Alert 65-542 and the Safe-T-Alert 65-541 . The first is flush mounted, i.e. the rear of the unit goes into your RV wall. The second is flush mounted. These are available in white, brown and black.

If your carbon monoxide alarm is battery powered, consider replacing it with the Costar 9RV which meets all the RVIA specs for humidity and temperature ranges. For more protection, install the Costar 12RV-DB which hooks to both your coach 12 volt system and to your RV 12 volt engine battery. This unit draws from the unit with the most power and also has a 9 volt battery back-up.

And make sure your smoke alarm was replaced within the past 5 years as well. Nothing more annoying than being woken in the middle of the night by a false alarm! The Safe-T-Alert 775 is a 9 volt battery powered unit that is UL listed and approved for RV use.

Thanks for your question.

Sincerely,

Barbara

Safe-T-Alert Manufacturer Rebate on Many 12Volt RV Gas Alarms 1-1-15 thru 10-31-2015

by Barbara 27. March 2013 07:13

Question about the rebate on Safe-T-Alert 12 Volt Gas Alarms.

Q:"Which models does the manufacturer's rebate cover? How do I get the rebate? Thanks, Mike."

Answer: The rebates are either $10 or $20 depending upon the model/models purchased by an end user. Limited to one LP Gas Alarm and/or one Carbon Monoxide Alarm OR one Dual LP / CO alarm per end user. In other words, the rebate is a maximum of $20 per customer.

  • RV Dual Carbon Monoxide/LP Gas Alarm models: 35-741, 35-742, 70-742 and 70-742-Kit (The Kit includes a gas valve. This unit shuts off gas if a leak is detected.) Eligible for a $20 rebate.
  • RV Carbon Monoxide Alarm model 60-541, 60-542, 65-541 or 65-542   Eligible for a $10 rebate.
  • RV LP Gas Alarm model 20-441, 30-441, 30-442, 40-441 or 40-442      Eligible for a $10 rebate

Obtain the rebate form from the Safe Home Products website. We do our best to include a rebate form with every unit we ship directly from Iowa City. Occasionally, we are out of stock and the unit ships directly from the manufacturer as a favor to us and to our customers.

To qualify:

1. Complete rebate form.
2. Enclose the following document(s): completed rebate form, a copy of the receipt or invoice, and the original UPC code from the product packaging.
3. Send all of these items to MTI Industries. The rebate and all documents must be received no later than

Rebates:
This mail-in rebate offer is valid only with purchases between March 1, 2013 and September 30, 2013 by an end user. Rebate must be postmarked by October 31, 2013.

Eligible Participants:
To qualify for this rebate, only the actual purchaser of the qualifying product may participate. End user must keep copies of all
materials sent. Materials received become the property of MTI Industries and will not be returned. No reproductions of UPC codes accepted. Please allow
8-10 weeks for receipt of rebate. MTI Industries is not responsible for lost, late, damaged, illegible, misdirected or postage-due mail. Use of multiple
addresses to obtain multiple rebate requests is fraudulent and could result in federal prosecution under the U.S. Mail Fraud statutes. PO Boxes are not
accepted for this promotion.

Restrictions:
Limit one rebate submission per household. Rebate issued in U.S. Dollars. Valid while supplies last for purchases made in the 50 United States and Canada. Promotion is void where prohibited or restricted by law. Not valid with any other rebate offer. Your right to receive the rebate will automatically terminate if you fail to negotiate your rebate check by the expiration date on it.

Disclaimer:
MTI Industries products may not be returned for refund once the rebate form has been submitted. Failure to submit any of the requested documentation will delay or
prevent the rebate issuance. MTI Industries also reserves the right to interpret the rules of this promotion at its sole discretion and all decisions made by
MTI Industries are final. MTI Industries is not responsible for any liabilities, taxes or expenses incurred by end user as a result of this promotion. Offer void where prohibited, taxed or restricted by law.

Thank you for your question.  Go to SafeHomeProducts.com to see blogs to help you match your CCI controls gas or carbon monoxide alarms to replacement ones by Safe-T-Alert. All Safe-T-Alert units are Made in USA.

Sincerely,
Barbara

Installation Height for Carbon Monoxide Alarms Is Your Choice

by Barbara 8. February 2013 10:52

Question about  installation height for most effective use of carbon monoxide alarms

Q:"How high do I need to install carbon monoxide alarms in my home?" Thanks. Rebecca

Answer: According to information from one of our manufacturers, you can install a CO alarm at any height in your home. The reason is that the molecular weight of air is almost identical to the weight of carbon monoxide. Air is typically composed of 78% nitrogen and 21% oxygen. Nitrogen has a specific weight of 28.013 while carbon monoxide is almost identical 28.011. CO mixes with
Air as their weights are approximately the same.

We advise you put the unit high enough that a child cannot tamper with the unit. Also remember that a minimum of 3 carbon monoxide alarms are recommended for a two story home, one on each level near the stairwells. Put one inside each bedroom if you close bedroom doors at night.

Direct plug-in units, CO alarms connected to a 12 or 24 volt security system and 9 volt battery operated ones give you many options.

We prefer the Costar 9RV, a 9 volt battery powered CO alarm that is for homes or recreational vehicles. These easily mount with two screws. The units cannot be reinstalled on the mounts unless there are batteries installed.

For homes with wired security systems, the CoStar Security System Carbon Monoxide Alarm,12-24SIR is a great choice.

Costar carbon monoxide alarms use a unique sensor that mimics red blood cells. Each sensor takes 28 days to "grow." The sensor reacts with carbon monoxide just as red blood cells do in our bodies. In other words, when a human is exposed to CO, the oxygen in the blood that attaches to red blood cells is replaced gradually by carbon monoxide. When carbon monoxide levels in an area near the sensor reach a level of 70 parts per million in a period of 60 to 240 minutes, the sensor is saturated sufficiently to set off an alarm. Below 35 ppm no alarm will sound. At 150 ppm, the alarm goes off within 10 to 50 minutes. At a level of 400 ppm, the alarm sounds within 4 to 12 minutes. 400 ppm alarm within 4 to 15 minutes.

Safe Home also sells RV carbon monoxide alarms that wire to both 12 volt systems, the coach and the engine, and have a 9 volt battery back-up. The CoStar 12RV-DB 12V RV CO Alarm W/9V Battery Backup protects you even if the 12 volt system is disconnected.

We also sell co alarms by other manufacturers that plug directly into 120VAC outlets. The only problem here is that few outlets are above a child's reach.

Thanks for your question.

Sincerely,

Barbara

UL and CSA Require RV CO and Propane Gas Alarms Stop Working in 3-5 Years

by Barbara 28. April 2012 10:03

Question about life span of carbon monoxide and propane monitor/alarms in RV's and trailers.

Q: "My RV has the original carbon monoxide and propane monitors. When should I replace them? Thanks Tom."

Answer: Safe Home recently learned that all newly manufactured 12V propane alarms and carbon monoxide alarms, whether combination alarms or single alarms, must include an internal shut-down system. The Safe-T-Alert brand we sell has an internal warning system that beeps and flashes when the sensor is dying and then beeps and flashes when the unit shuts down from sensor failure. Typical life is 3 to 5 years unless the sensors are exposed to aerosols such as spray deodorants, cooking sprays, cleaners, etc. Note the date of installation on the outside of the unit with a sticker or log into your owner's manual so you won't be awakened in the middle of no where with the bad news that your units are or have failed.

Below is the information we received from Safe-T-Alert in April 2012 to share with customers.

CARBON MONOXIDE & PROPANE ALARM REPLACEMENT NOTICE: Note to Customers:

All Safe-T-Alert Propane and Carbon Monoxide Alarms that are 5 years old and older are beyond their Mandatory Replacement Time and MUST be replaced.

Background: Underwriters’ Laboratories (UL®) Carbon Monoxide Standard UL 2034 and Canadian Standards Association (CSA®) CSA 119.2 now require that all Carbon Monoxide alarms be designed to stop service in 3 to 5 years . UL and CSA have determined that Carbon Monoxide alarms have a limited life. Propane alarms use similar sensors and UL will require the same service life in the near future.

ALL MTI Propane and Carbon Monoxide alarms which are over five (5) years old MUST be replaced. The following Safe-T-Alert Carbon Monoxide Alarm Models MUST be replaced: SA-4, SA-5, 50-541 and 50-542. Models 60-541 and 60-542 over five (5) years old MUST be replaced.The following Safe-T-Alert Propane Alarms Models MUST be replaced: SA-7 and SA-8. Models 30-441,30-442, 40-441 and 40-442 that are over five (5) years old MUST be replaced.

Important! Only install CO and Propane alarms that are UL or CSA listed for Recreational Vehicle Use.

Thank you for your question.

Sincerely,

Barbara

 

 

Chart Showing Safe-T-Alert Replacement 12V Propane Alarms CCI Controls Alarms

by Barbara 26. April 2012 10:35

Question about replacing CCI Controls Propane Gas Alarms and Propane Alarms with Tank Valve Shut-Offs with Comparable Safe-T-Alert models.

Q: "My CCI propane alarm in my RV has failed. What unit is available as a replacement since CCI Controls is not in business?" Thanks. Ed

Answer: Below is a chart. The entire unit must be replaced if your CCI Controls unit has an automatic gas valve shut off. Safe-T-Alert replacements for that unit will not work with the CCI valve. Note: new standards require that propane alarms shut down 5 years after installed to power. Shelf life is 10 years if not used.

Below is our main replacement chart.

CCI # Propane MTI Replacements MTI Replacements
CC-7719.04 70-742-R Kit with Valve Surface Mount
CC-7719.58 70-742-R Kit with Valve Surface Mount
CC-7719.70 70-742-R Kit with Valve Surface Mount
CC-7773-231 30-442-P-BR or 35-742BR Flush Mount
CC-7773.081 30-442-P-BR or 35-742BR Flush Mount
CC-7773.251 30-442-P-WH or 35-742WH Flush Mount
CC-7770.230 30-442-P-WH or 35-742WH Flush Mount
CC-7770.231 30-442-P-WH or 35-742WH Flush Mount
CC-7770.233 30-442-P-WH or 35-742WH Flush Mount
CC-7770.234 30-442-P-WH or 35-742WH Flush Mount
CC-7770.241 30-441-P-BR Surface Mount
CC-7773.151 30-442-P-BR or 35-742BR Flush Mount
CC-7770.244 30-441-P-WH Surface Mount
CC-7770.250 30-442-P-WH or 35-742WH Flush Mount
CC-7770.251 30-442-P-BR or 35-742BR Flush Mount
CC-7770.253 30-442-P-BR or 35-742BR Flush Mount
CC-7770.254 30-442-P-BR or 35-742BR Flush Mount
CC-7770.281 30-442-P-BR or 35-742BR Flush Mount
CC-7770.284 30-442-P-WH or 35-742WH Flush Mount
CC-7771.231 30-442-P-BR or 35-742BR Flush Mount
CC-7773.081 30-442-P-BR or 35-742BR Flush Mount
CC-7773.151 30-442-P-BR or 35-742BR Flush Mount
CC-7773.231 30-442-P-BR or 35-742BR Flush Mount
CC-7773.251 30-442-P-BR or 35-742BR Flush Mount
CC-7773.251 30-442-P-BR or 35-742BR Flush Mount

Note: the 30-442 and 35-442 share the same case size. Both recess into the wall so the unit front is flush with the wall. The 35-742 gives you extra safety as you have a carbon monoxide sensor with alarm in the same unit. Please contact Safe Home at sales@safehomeproducts.com or phone us if you have questions. We also sell Costar 9RV battery powered carbon monoxide alarms and Costar 12RV alarms with 9 volt battery back-up systems. Remember that propane leaks are dangerous and carbon monoxide are as well because they can kill silently.

To find these products on our website, go to www.safehomeproducts.com. Go to the search box. Enter for example Safe-T-Alert of 30-442 in the search and you'll get results fast.

Cut-Out Sizes for Flush Mount Units:

30-442-P-or 35-742:

  • Unit Front Measurements: 6.375"W x 2.875"H x 1"D
  • Unit Back Measurements: 5 3/8" x 1 7/8" (part that recesses into wall.

65-542RV :

  • Unit Front Dimensions: 6.5" x 3.5" x 1 3/8 Deep. Unit back dimensions: 5.5" x 3".
  • Case Dimensions: Cut Out: 5.5" x 3".
  • Select  a  wall  location at  least 4” off the
    floor.  Cut a 5 5/8” (143mm) W x 3 1/8” (79mm) H hole

35-741 Cobination Propane and CO Alarm

  • Front Dimensions: 6.5”W x 2.75”H x 1.5”D
  • Cut Out : 5 3/8" x 1 7/8.

Thank your for your question. Please contact us via sales@safehomeproducts.com if you have more questions.

Sincerely, Barbara

Replace CCI Controls 12V Carbon Monoxide Alarms with Safe-T-Alert

by Barbara 26. April 2012 10:09

Question about replacement of CCI Controls carbon monoxide alarms with Safe-T-Alert Models.

Q: "How do I know which carbon monoxide alarms should replace the discontinued CCI controls models?" Thanks. Jim

Answer: Here is a chart provided by Safe-T-Alert. The Safe-T-Alert 65 Series come in flush mount (the 65-542) and in surface mount (the 65-541). Available colors are brown and white.

 

CCI CO Alarm
Safe-T-Alert Replacement
CC-3400.000 Flush Mount 65-542
CC-3400.001 Flush Mount 65-542-BR
CC-3400.003 Flush Mount 65-542
CC-3400.004 Flush Mount 65-542
CC-3400.050 Flush Mount 65-542
CC-3400.051 Flush Mount 65-542
CC-3400.052 Flush Mount 65-542
CC-3400.053 Flush Mount 65-542
CC-3400.060 Surface Mount 65-541
CC-3400-064 Surface Mount 65-541
CC-3400.062 Surface Mount 65-541
CC-3400.063 Surface Mount 65-541
CC-3400.064 Surface Mount 65-541
CC-3400.090 Surface Mount 65-541
CC-3400.091 Surface Mount 65-541
CC-3400.093 Surface Mount 65-541
CC-3400.094 Surface Mount 65-541

All propane and carbon monoxide alarms should be replaced every 5 years.

65-542 flush mount case dimensions are 6.5” W x 3.5” H x 1 3/8 " deep. A 4 inch wide x 3 inch high cut out is required with a 1 3/8 inch clearance for installation.

Thank you for your question. To find these products on our website, go to www.safehomeproducts.com. Go to the search box. Enter for example Safe-T-Alert of 30-442 in the search and you'll get results fast. Send us email to sales@safehomeproducts.com or phone us if you have more questions.

Sincerely, Barbara

Safe-T- Alert Replacement RV Carbon Monoxide Alarms for a CCI Controls 3400.0 or 3400.094.

by Barbara 26. December 2011 10:57

Question about which Safe-T-Alert CO alarm replaces the CCI 3400.0

Q: "Hello,I am trying to replace this item for a customer. They currently have a CCI Model No. 3400.0. Which of yours would replace this model?Thanks so much Tammy."

Answer: The replacement units for the CCI Controls 3400.094 carbon monoxide alarms for RV's are the Safe-T-Alert SURFACE MT 12V RV/CO Alarm BROWN, 65-541 or the Safe-T-Alert 65-541 SURFACE MT 12V RV CO Alarm WHITE.

These are both surface mount units.The update to 65 has to do with the 5 year warranty from date of sale. All units should be replace every 5 years.

The good news:  Safe-Alert typically has a summer rebate program ranging from $10 to $20, a true incentive to replace aging units. In 2013 this rebate ends in September.

Safe-T-Alert 12V CO Monitor & Alarm 65-541 RV formerly the 60-541 Features:

  • Fully Operational When CO Alarm is Muted:   Mute does not override detection circuit, giving you full time protection as you ventilate your vehicle.
  • Memory Scan. Retains CO level that activated the alarm . After ventilation, the memory saves the carbon monoxide level.
  • Micro Current Technology. Saves precious battery power.
  • Two Level Carbon Monoxide Alert: Caution Alarm (60 ppm) and Hazard Alarm (at or above 100 ppm).
  • Maintenance free sensor.
  • Loud 85 dB Alarm.
  • Test/Reset Button. Used to temporarily silence alarm during ventilation. Tests all detector functions and activates Memory Scan.
  • Hard Wires to 12 Volt Power
  • UL Listed to UL 2034-2005 for Recreational Vehicles and Unconditioned Areas, including March 8, 2007 revisions. Meets RV standard ANSI A119.2 as required by the RVIA.
  • UL tested for vibration, cooking fumes, shock, humidity, salt water spray, corrosion and temperature extremes.
  • Warranty: Note: The Date Stamped on each Detector is the Date of Manufacture. Each unit has a 10 year shelf life. The Warranty is 1 year and begins from the date of resale. Sensor life is 5 years.  End of Life Date: 5 years from Date of Purchase. The 65- designation is for this newer unit per new regulations. Replace units after 5 years.Contact MTI directly for warranty related questions.
  • Replace if sensor or unit is faulty.
  • Please mark date of installation on unit and replace no more than 5 years from that date. Shelf life: 10 years according to the manufacturer.
  • Made in USA (Illinois)

RV Operating Specifications

  • UL tested for vibration, cooking fumes, shock, humidity, salt water spray, corrosion and temperature extremes.
  • Power 12 VDC, operational range 8-16 volts.
  • 60 milliamp current draw.
  • Operational Temperature Range: -40° F to +150° F (-40° C to +65° C).
  • Case Dimensions: Surface Mount 65-541 5.5"W x 3"H x 1.3"D: Attaches to Wall with Screws.
  • Screw Holes: Centered, approx. 5 1/4" apart.
  • Weight: 65-541 = 0.43 lb. 

Thank you for your question. We appreciate your help in adding this blog.

Sincerely, Barbara

California Law Effective July 1, 2011 for Installation of Carbon Monoxide Alarms in All Single Family Homes

by Barbara 27. June 2011 14:13

Question about approved carbon monoxide alarms for use in California.

Q: "Do you sell carbon monoxide alarms on the "List of California State Fire Marshal Approved Carbon Monoxide Alarms"? The law now requires these be installed in every single family dwelling. How quickly can they be shipped. Thanks. Steve."

Answer: Yes, we do sell several approved carbon monoxide alarms. Unless you are ordering a large quantity of units, we ship within 3 business days using either the postal service or UPS.  The Fire Marshall list expires in July 2012.

Costar Models:

Kidde and Kidde Nighthawk Carbon Monoxide Alarms:

If there are other approved Kidde units you would like pricing on, please let us know. We are able to discount larger quantities of these products. Most come in case of 12 or 24 units. Remember you need to install at least one carbon monoxide alarm on each level of your home and one CO alarm in every bedroom where the door is shut at night. Do remember that if you have gas burning appliances like ranges, stoves and furnaces that you also should add gas alarms for propane or natural gas to protect against explosions and fires.

Thank you for bringing this new law to our attention.

Sincerely, Barbara

WA State Requires Automatic Gas Valve Shut Off System in New Homes

by Barbara 16. April 2011 08:06

Question about the Scentry III GFRAB Home LP/Natural Gas Detector.

Q: "How fast can you get a Scentry III system to me? Washington State now requires an automatic gas shut off system be installed before an occupancy permit can be issued for a new home who has a propane furnace in the basement. We are desperate. What I need are several components, the Scentry III GVL .75 Inch Gas Valve and the Scentry III GFRAB Home LP/Natural Gas Detector. My plumber is ready to install it. Our home rental is almost up. We are desperate. We have propane in this new home since it is in the country. Thanks. Robert."

Answer: Yours is the third sale to Washington state in the first two weeks of March. That is encouraging news to the building trade as the economy begins to improve.

The other sales were to Olympia, Seattle and to Bainbrdige Island. You live in Port Orchard. We appreciate that you've offered your contractor our contact information since we do have discounts available on packages of 6 units. We can next day air the units to you.

All customers ordered the 3/4 inch gas valve and the GRAB model. For those who are unfamiliar with these units, the Scentry models are all made in the USA, in fact in Davenport, IA. There is also a 220VAC model available for those who live outside the USA. All gas valves throughout the world are essentially sized the same so a USA made valve works fine in countries where 220V is the standard.

You should consider adding additional gas sensors if you have a propane range or propane fireplace. I know you've shared that both your water heater and furnace are in the same utility room.

In your case, you say that intermittent power failures are rare in your area plus your appliances do not have a standing pilot light. If a home owner with standing pilot light units elects to protect with a Scentry, then we do recommend the battery back-up unit.

Remember to check your carbon monoxide alarms at least monthly and change batteries annually if they are 9 volt units. There is nothing worse than an alarm beeping a low battery warning at 3 a.m.

Thank you for your question and for being our customer. We show your unit arrived on time, Next Day Air Saver, as you requested.

Sincerely,

Barbara

120V Propane Alarms and CO Alarms Protect Park Model Trailers with Gas Appliances

by Barbara 12. April 2011 10:54

Question about the Safety Siren Propane and Natural Gas Alarm

Q: "We live in a park model modular home in a retirement community in northern Florida.  It is a one bedroom unit. Our furnace, our hot water heater and our range are all propane. A central tank supplies several homes. We've read that trailers and motor homes have 12 volt propane alarms and 12 volt carbon monoxide alarms hard-wired into the 12 volt system. Ours is 120Volt. The outlets are near the appliances and near the floor. The water heater is in a closet as is the furnace. What do we need to protect ourselves from a fire or explosion? Thanks. Tim and Diane."

Answer: In your situation, you need a minimum of two carbon monoxide alarms, one inside your bedroom and one in the living area at the other end. You need 3 propane gas alarms. Each one of your gas appliances needs a combustible gas alarm installed near to it. This means inside the closets where the furnace and the water heater reside. We understand from a park home model reseller that at least the newer models do have outlets near the appliances and near the floor.

Our suggestion is that you install two of the RV carbon monoxide units, the CoStar 9V Battery UL Home and RV Carbon Monoxide Alarm. This is because these units can handle both high humidity and high temperatures without sensors being destroyed. Operating Environment:-40 degrees F to +151 degrees F 15% to 95% RH. Since they are battery powered, you don't have to worry about plugging them into those very scarce outlets. Just change the battery out once a year.

As far as the propane alarms are concerned, we recommend that you use direct plug in units only if you have outlets close to the appliance and low to the floor. Propane is heavier than air so it sinks and pools around the bottom of an appliance. Otherwise, we recommend that you install the Safe-T-Alert Propane Natural Gas Alarm, 120V because it has a 65 inch cord that allows proper placement probably 99% of the time. This unit has micro current technology which means it uses only 3.8 watts of energy, which is about US $3.00 per year to operate. Since propane gas is heavier than air, mount this gas alarm within 4 to 20 inches of the floor. For methane or natural gas which is lighter than room air, mount the detector within 6 inches from the ceiling or on the ceiling at least 12 inches from a wall.

Thank you for your question. Remember that carbon monoxide is a by product of incomplete combustion of fossil fuels like propane, natural gas, wood, etc. Raw propane or natural gas detectors won't detect carbon monoxide nor will carbon monoxide sensors detect raw leaking gas. We do sell a combination plug in unit as well. Proper placement for carbon monoxide detector alarms is different from combustible gas alarms.  For example, gas-burning appliances may emit it a small amount of carbon monoxide when starting up. So this carbon monoxide alarm should be placed 15 feet or more from heating or cooking appliances and never hear a very humid room such as a bathroom.

Sincerely, Barbara