Safe-Home.com

Healthier Living | Child Safety | Eco Friendly Tips

Protect Sharp Corners of Exterior Metal Posts With UV Treated, Anti-Bacterial, Molded Foam Basic Corner Strips

by Barbara 7. January 2013 10:58

Question about how to safetyproof metal square posts in a Headstart playground area with Boing yellow corner strips

Q: "The director of my Headstart Program wants to protect children in our playground from (16) sixteen 90 degree angle square metal posts. He wants each post protected at least 48 inches from the base of each post. Four metal posts are 4 inches on a side. The other 12 metal metal posts are 3 inches on a side. What do you suggest? Thanks. Helen from Texas."

Answer: After reviewing all the options, I phoned my manufacturer. The only option is to purchase the Basic Corner Strips, cut them and stack them to the appropriate height. These are "Skin Urethane" molded foam strips with a shock absorbing "inner" foam and a thick outer “skin” to protect from abrasion, UV rays, moisture and bacteria.

Polyurethane is a completely self-skinning polymer that is stain-resistant, puncture-resistant and remarkably easy to clean.It resists staining caused by grease, chemicals, waste products, and other liquids, and can be cleaned as easily as a countertop. Polyurethane is naturally antibacterial/antimicrobial and odor-resistant, making it ideal for clean room environments.

Each shape of protective padding or protective corners is made to specific dimensions and baked in a mold for 30-40 minutes. This basic corner strip is currently available in yellow, red, green, blue, orange and ivory. The primary colors are the most popular for safety proofing, especially the yellow. Black and grey are usually available. At this writing, January 7, 2013, neither is available.

I suggest you purchase the case of 25 yellow as you need at least 20 and this is the most economical way to buy. Each stick is 39.5 inches long (39.4 inches on the inside) by 2.25 inches by 2.25 inches and 1/2 inch thick. Cut the sticks to stack them the height that you want. Put the cut side at the bottom and use silicone to seal that edge when you cut these lengths to stack to the 48 inches that your director wants: then water and moisture do not effect the strip. These strips are made to be installed either inside or outside. You need a minimum of 20 strips to cover the 48 inches. This product covers the sharp corner edges of the 90 degree angle posts. There is no product to will "fill in" the missing space.

Boing Safety Corner Edge Strip Features:

  • Designed for all types of wall/equipment/furniture corners, fireplaces etc.
  • Also great for "square posts".
  • Shock Absorbing.
  • Durable and long lasting.
  • Easy installation.
  • Use "GE-Silicone I" or II brand Rubber Silicone.
  • Quick repair or replacement.
  • Waterproof.
  • Can be used indoors or outdoors.
  • Fire retardant.
  • Anti-Bacterial.
  • UV treated.
  • Non-toxic: contains no PVC or phthalates.
  • 10 colors: Red, Orange,Yellow, Ivory,Green, Sky Blue, Indigo, Grey, Brown, and Purple.
  • Colors match 3 D Corner Cushions (not included).
  • Dimensions: Each stick is 39.5" long x 2.25" x 2.25" x 1/2" thick.
  • Non returnable if used.
  • Limited 1 year manufacturer's warranty. 

Basic corner strips are also available in boxes of 4 and 10 strips. Please contact us if you have more questions. Thank you for the opportunity to quote.

Sincerely,

Barbara

 

Childproofing A Home Against the Biggest Home Risks to Children

by Barbara 8. July 2012 06:00

Question about the most common dangers to children in and around homes.

Q: "We have a 6 month old baby, our first. Where should we begin to childproof our home? What are the biggest risks to a toddler or younger child? Thanks. Sue."

Answer: According to the USA Today, July 5, 2012 report, the Consumer Protection Product Safety Commission lists drowning, poisoning and tipping furniture as most common dangers. You may recall the baby crib recall. The cribs our parents used for us and we used for our children and grandchildren can no longer be sold. Remember the double release locks you pushed with your foot and the side dropped?  The Commission received reports and does research to determine which products are safe.

Drowning, poisoning and tipping furniture are considered the most common risks to young children. Cordless window blinds are recommended to reduce risks of strangulation.

The COSC recommends that whatever safety devices you buy for do-it-yourself installation or have installed by handymen or professional childproofers meet voluntary industry standards or are recommended by the Juvenile Products Manufacturers Association.

Common sense tells you that poisons, medications, dishwasher detergent, etc. must be stored in secure places whether that place is a cupboard or a closet.

Here are a few suggestions based upon our customers' purchases:

These are childproofing products that are easily installed and may save the life of your child or grandchild or a visiting child.

Thank you for your questions.

Sincerely,

Barbara

 

Safety Tip: Increase Warehouse and Industrial Safety with Edge Pads on Sharp Edges

by Barbara 19. June 2012 04:16

Question about Kids Edge Cushion Pad Large Profile 2 3/8 x 2 3/8 x 36 Inches, Black 100/Case

Q: "Is this the correct product to cover sharp edges of warehouse shelving? Are there other options? Are there corners to match? We need to increase our warehouse safety. Thanks. Sam."

Answer: To choose the correct product or products, first determine the width  or widths you need to cover. Once you have decided that, then choose a color.

For example, the most economical way to purchase the wide edge cushioning is in the 2 3/8 inch x 2 3/8 inch x 36 inch lengths either in boxes of 48 or 100 pieces. That edge padding comes in ivory, gray, taupe , brown and black. Gray and black are currently the more popular colors. If you do not need the width, then the Kids Edge Cushion Padding 1x1 in.YELLOW 100 Ft. with Tape or the Kids Edge Cushion Pad 1 x 1 in. 400 Ft. YELLOW NO TAPE that you attach with adhesive from a caulking gun. Both products come in brown, gray, ivory and black as well.

There are corners to match each width of edge pad. Custom sized corners are available as well.

Another option is more expensive. That is to use the Boing Skin Urethane Corner Cushion Strips which are wider and a little longer. The favorite for warehouses is the Boing Yellow Corner Cushions each of which measures approximately 39.4 inches long by 2.25" x 2.25" x 1/2" thick. Each strip is made from skinned urethane foam which gives it more resilience.

Thank you for your question.

Sincerely,

Barbara

Boing C Shaped Skin Urethane Foam Edge Cushion Covers 1 Inch Pipe or Pole

by Barbara 16. July 2011 11:34

Question about the Boing Skin Urethane Foam Corner Strip Slim C Yellow 2/BX

Q: "We have exposed 1 inch poles in our warehouse. Lighting in the warehouse is not the best. Can this be used to cover the poles to keep obvious to our employees and keep both them and the poles from damage? How do we install the strips? Thanks. Mark."

Answer: This product was made especially for uses such as you describe. The interior of the pad is curved like a C so it is easily attached to the pole material with GE Silicone I, II or the new II fast set adhesive. You can also use these strips on any one inch diameter parts of your forklift truck.  Each strip is 72 inches long by 1 inch wide and 5/8 inch thick at the thickest point in the middle of the strip. Skin urethane foam has a dense shock absorbing inner layer covered by a tough outer layer. The outer layer is resistant to UV, abrasion, moisture and bacteria. 

We sell the Slim C, the Slim V, Flat Pads, Wall Guard Pads and other Boing products in quantities to meet your need. The minimum purchase quantity varies from product to product. For example, the smallest number of Slim C urethane foam cushioning available is in this quantity of 2. Colors include, ivory, yellow, black and gray.

Thanks you for your question.

Sincerely, Barbara

Advantages of Skin Urethane in Boing Safety Pad Corners, Edge Corner Cushion, Strips, Wall Pad, Etc.

by Barbara 16. November 2010 07:35

Question about the Boing Skin Urethane Foam Padding in Boing Fire Retardant Safety Wall Pad, 31x11.75 In, YELLOW, 4/BX, Boing Pole Pad or Post Pad 5 Inch Diameter - Yellow, Boing Edge Corner Strips-YELLOW, Case of 10 and Boing 3D Jumbo Corner Covers, YELLOW,4/PK.

Q; "I need to safety proof a warehouse. I've looked at various products. I'd like to know the advantages of using a skin urethane foam product rather than standard extruded foam which seems less expensive. Thanks. Thomas."

The main advantages are that this is a sturdy material and quite shock-absorbing and comes in products to meet almost every safety proofing need. Read on for more detail.

The Boing skin urethane products are safe for both commercial and residential uses, having passed or surpassed safety requirements including compression, toxicity, etc. Skin urethane has anti-bacterial properties and passes the ASTM G21 testing. There is no PVC, lead or phthalates in these products.  Although fire retardant, the Boing foam does not meet the current Class A fire codes for fire and smoke retardants. There are many different local, national and international fire codes, each with different property requirements so one product cannot meet all the possible codes.

Skin Urethane is long-lasting. Of course, there are instances where excessive use or aggressive use will reduce longevity. this was desifned as shock-absorbing safety padding to reduce injuries.
Size tolerance of skin urethane is within 5% in the size and density of the finished products. That is because skin urethane is molded, one piece at a time, and can be effected by temperature, humidity, season, weather, etc. Baking lasts about 30 to 40 minutes.

Boing safety pad products are usable indoors or outdoors. All safety padding products are UV treated but over time, like all plastics, there will be some fading. The stronger the sun, the faster the fading occurs. Darker colors fade faster. The impact absorbing qualities are reduced in very cold (below 32 F) and in very hot (over 100F) temperatures. The most UV resistant colors are the primary ones, red, blue, green and yellow. It is best if the product is not exposed to direct sunlight for extended periods.

Installation: We recommend GE-Silcone I, Silicone II or Silicone II (2X). Also 3M VHD (very high bond) tape is a great option
Aluminum re-inforced strips can be attached with screws (strips are pre-drilled & we provide the screws)

Amount of silicone needed: Varies withe the type of surface to be protected and the degree of adhesion. As a rough estimate, you can generally attach the following numbers with a single 300ml tube:

  • Wall Pad - 2 to 3 wall pads per tube
  • Edge Corner Strip - 6 to 8 edge corner pads per tube
  • Jumbo Corner Guard - 12 to 14 corners per tube
  • Post Pad - 1 to 2 post pads per tube. Remember this product fits only 5 inch diameter poles.

Cleaning and maintenance of safety padding: Use non-abrasive cleaners, normal household cleaning solutions. Permanent markers rarely can be removed.Use around water activities is fine. Do not cut or puncturer. Fasten to clean and dry surface. Chlorinated water will cause discoloration as will that with a high TDS rating.

Thanks for your question. Our most popular products for safety proofing are the yellow ones for obvious visual reasons!

Sincerely, Barbara

Boing Brand, the Best Safety Pad Edge Cushion, Pole or Wall Pads for Outdoors

by Barbara 10. August 2010 08:38

Question about the Wide Profile Black Edge Cushion by Cardinal Gates and the Boing Wide Profile Edge Padding.

Q: "Which of these edge paddings would work the best to protect an outdoor children's play area? There is a rough edged "paver" type wall that is porous. We want to coer it with a black padding to keep children from injuries. Also what is the best way to attach the padding? Thanks, Matt."

Answer: For indoor use, either brand of edge cushion padding will work. The Cardinal Gates padding sticks are the same as used for hearth guard. They come 9 to a box, each pad measuring 48 inches long and 2 3/8 inch x 2 3/8 inch on the lip.The Boing padding is 39.5" long x 2.25" x 2.25" x 1/2" thick.

For outdoor usage, we recommend using the Boing padding. It is made from what is called "skin urethane." That material is a special one-piece foam material which has both a shock absorbing "inner" foam and a  thick outer “skin” to protect from abrasion, UV rays, moisture and bacteria. It is designed for heavy duty use any where that there are sharp or dangerous edges, corners or surfaces. These uses include all types of recreational play areas, manufacturing and commercial, lLogistics and transportation facilities and equipment, military facilities, vehicles and equipment,medical and educational facilities, residential areas, etc.

Skin urethane Characteristics:

  • Safety. It has passed or surpassed a variety of safety requirements including Compression, Toxicity etc. Safety testing documentation available upon request. It has anti-bacterial properties and passes ASTM G21 testing for a variety of bacteria. Our Boing skin urethane products contains no PVC, lead or phthalates.
  • Not Fireproof. Does not currently contain fire and smoke retardants to meet Class A fire codes.
  • Durability: Durable relative to the amount and type of use. It will last many, many years if used in the manner it was designed. Longevity will be reduced by excessive or aggressive use.
  • Size tolerance: Can be up to a 5% variation in the size and density of the finished product. Skin urethane is produced in a mold - one piece at a time. The "baking" forcess that lasts 30-40 minutes can be affected by temperature and humidity which will vary by season and weather variations.
  • UV resistance:  Indoor or outdoor use.  All plastic products, even those that are UV treated, will eventually fade in the sun. The stronger the sun, the faster it fades. The darker the initial color, the stronger it fades. In addition the impact absorbing characteristics are reduced in very cold (below 32F) and very hot (over 100 F) weather. These factors will vary from region to region.
  • Impact absorption: impact absorbing characteristics are reduced in very cold (below 32F) and very hot (over 100 F) weather
  • Best UV resistance:4 primary colors (Red, Blue, Green, Yellow. Best not to expose to direct sunlight for extended periods.
  • Standard Adhesive Installing: For most installations, use “GE-Silicone I or II". The "II" version is supposed to be the improved version.
  • High Adhesion Installation: For those locations with a need for very high adhesions, use 3M VHB (Very High Bond tape)
  • Aluminum reinforced strips can be attached with screws (strips are pre-drilled & we provide the screws)
  • How much silicone do you need? The amount will vary with the type of surface to be protected and the degree of adhesion. As a rough estimate, you can generally attach the following numbers with a single 300ml tube:
    Wall Pad - 2 to 3; or
    Corner Strip - 6 to 8; or,
    Jumbo Corner Guard - 12 to 14; or,
    Post Pad - 1 to 2 sets
  • Silicone removal: scraping with a blade or craft knife ior use DAP's Silicone-Be-Gone. Oil-based solvents do require proper ventilation and gloves.Silicone can be removed by scraping with a blade or craft knife, but that can be laborious and isn't always practical.  Instead, try using a solvent that's made to remove silicone.There are a number of solvents on the market, but one of the best is Silicone-Be-Gone, a product made by DAP and developed specifically for removing silicone.  It can be used both for dissolving cured silicone and for cleaning up the area around freshly applied silicone.  The product takes several hours to work completely. It's also an oil-based solvent that has a noticeable odor, so use with proper ventilation.  It's also a good idea to wear gloves to minimize contact with your skin.  Krud Kutter, mineral spirits or rubbing alcohol also work and are safer but take more time and scraping.


Other questions about Boing Safety Pad Products:

  • Can you paint Skin Urethane products? We do not offer "painting" products or services.There are some "water-based" urethane paints to which you add color pigment. You can try, for example SC115 aliphatic polyurethane coating. May require SC-80 water based primer. There is also a solvent based SC89 flexible urethane coating but it requires excellent ventilation and proper protective mask. Due to the complexity of the product,variable sizes etc, we do not get involved in the sale of such products.See www.burmanfoam.com
  • How do you clean and maintain the safety padding?Under normal circumstances, little maintenance is required. Cleaning should be undertaken with normal household cleaning materials that are "non-abrasive". Limit your use of "solvent based" cleaners to the toughest cleaning jobs - follow manufacturers instructions. Unfortunately certain kinds of permanent markers like ballpoint pens and felt pens cannot be completely removed as the ink seeps into the surface layer.
  • Can Skin Urethane padding be used on the floor or under playground equipment?The current shapes we offer are not designed for flooring use. The Wall Guards can be placed on the floor - but are not rated for ASTM 1292 - Safety Surfacing for Flooring.

I hope this helps with your decision. Thanks for your question

Sincerely, Barbara

Using Wider Fire-Resistant, Impact Absorbent Edge Cushion and Corner Pads as Work Safety Products

by Barbara 20. August 2009 04:52

Questions about Gray Kids Edge Hearth Guard 54 Inch Pad Sticks and Gray Hearth Guard 7 Inch by 7 Inch Corners and Boing Edge Corner Strips (Pack of 4) -GREY

Q: "I am in charge of maintenance and safety in a factory that makes boxes and other packaging products. There are many sharp edges on railings, assembly lines, etc. We need wider corner and edge cushions due to the size of the edges. Are either of these products suitable? How difficult is it to install?

Answer: Both lines of product are fire-resistant, non-toxic and easily applied with contact cement if you prefer not to use the adhesive tape on the Kids Edge products. Boing recommends only the GE-Silicone I brand rubber silicone cement. A long sharp knife like a fillet knife is recommended for the cleanest cut. Lubricating the entire length of the knife with soapy water or liquid soap, then moving the knife back and forth with the blade straight will give the cleanest cut.

Gray and yellow are the more popular colors for industrial usage. If you have poles that require padding, we recommend the Boing Yellow Pole Pad if your poles have a 5 inch diameter. This brand has two halves that connect. Each half is 19.5 inches long and .5 inches thick. The other choice is the Kids Edge yellow padding which is 48 inches high and has an interior diameter of 2 1/8 inches. Two pieces can be wrapped about a pole and pieces can be added to fit. There are also matching yellow corners and wall padding for the Boing products.

If you have a bigger project, we now offer quantity pricing on all 36 inch lengths of wide profile extruded foam edge padding. For example, choose the Kids Edge Cushion Pad Large Profile 2 3/8 Inches x2 3/8 Inches x 36 Inches in Black, 48/Box or purchase gray, taupe, brown or ivory in the 48 piece or 100 piece boxes. This product is made in the USA and usually ships within 5 business days or less.

Thanks for your question. Let us know if we can help further.

 Sincerely, Barbara

Measuring A Fireplace Hearth and Installing Kids Edge Hearth Safety Pad Without a Metal Frame

by Barbara 19. August 2009 12:39

Question about Kids Edge Hearth Safety Pad installation when there is no metal frame.

Q: "How do I install hearth pad on the edge and sides of my fireplace hearth if it does not have the metal frame? My hearth is poured concrete so I don't need the frame. How do I know if I have purchased enough padding? Thanks." Tom

Answer: First decide which color you want. Padding comes in gray, brown, black, taupe and ivory. Next measure the length of the hearth. Then measure the width of the side or sides. If the total equals 150 inches or less, the standard hearth pad kit will work. Each kit contains 90 inches of straight padding and two corners that are 10 inches by 20 inches. So you can cover the front of a hearth that is up to 130 inches long with 10 inches of returns to the fireplace or 110 inches of width with a return of 20 inches in depth.

These are the steps to take:

  1. Make sure the hearth edge is clean and dry.
  2. Lay out the pad on the hearth to determine how it will fit.
  3. Attach the corners, Remove the adhesive backing from the lower part of the pad. Fit it onto the hearth. Next remove the adhesive backing from the upper portion and press it onto the hearth.
  4. Next attach the straight pieces to the hearth. Press ends together as you attach each piece to help conceal joints.
  5. Most likely, you will need to cut the last piece installed.
  6. Measure the space to be covered accurately
  7. Add approximately 3/8 inch and mark the pad.
  8. Place pad on shipping box edge.
  9. Use a sharp long bladed knife such as a fillet knife in this next step
  10. Lubricate the entire length of the knife with liquid soap or soapy water
  11. Using light pressure, move the knife back and forth on the top of the pad, keeping the blade straight.
  12. Repeat on bottom half after turing over the pad
  13. Attach the last piece of pad by removing the backing as noted in step 3.

If you need additional lengths of padding, you can purchase by the foot or by the 54 inch stick. Remember extra padding can be used to pad tops of stairways into basements, etc.

Thanks for your question. We recommend that you do a safety walk around of your entire home as well to find other places that need safety proofing. Among the most dangerous items are aquariums, tv sets, bookcases, windows open more than 4 inches and sharp corners and edges on furniture.

Sincerely, Barbara