Question about the Boing Skin Urethane Foam Padding in Boing Fire Retardant Safety Wall Pad, 31x11.75 In, YELLOW, 4/BX, Boing Pole Pad or Post Pad 5 Inch Diameter - Yellow, Boing Edge Corner Strips-YELLOW, Case of 10 and Boing 3D Jumbo Corner Covers, YELLOW,4/PK.
Q; "I need to safety proof a warehouse. I've looked at various products. I'd like to know the advantages of using a skin urethane foam product rather than standard extruded foam which seems less expensive. Thanks. Thomas."
The main advantages are that this is a sturdy material and quite shock-absorbing and comes in products to meet almost every safety proofing need. Read on for more detail.
The Boing skin urethane products are safe for both commercial and residential uses, having passed or surpassed safety requirements including compression, toxicity, etc. Skin urethane has anti-bacterial properties and passes the ASTM G21 testing. There is no PVC, lead or phthalates in these products. Although fire retardant, the Boing foam does not meet the current Class A fire codes for fire and smoke retardants. There are many different local, national and international fire codes, each with different property requirements so one product cannot meet all the possible codes.
Skin Urethane is long-lasting. Of course, there are instances where excessive use or aggressive use will reduce longevity. this was desifned as shock-absorbing safety padding to reduce injuries.
Size tolerance of skin urethane is within 5% in the size and density of the finished products. That is because skin urethane is molded, one piece at a time, and can be effected by temperature, humidity, season, weather, etc. Baking lasts about 30 to 40 minutes.
Boing safety pad products are usable indoors or outdoors. All safety padding products are UV treated but over time, like all plastics, there will be some fading. The stronger the sun, the faster the fading occurs. Darker colors fade faster. The impact absorbing qualities are reduced in very cold (below 32 F) and in very hot (over 100F) temperatures. The most UV resistant colors are the primary ones, red, blue, green and yellow. It is best if the product is not exposed to direct sunlight for extended periods.
Installation: We recommend GE-Silcone I, Silicone II or Silicone II (2X). Also 3M VHD (very high bond) tape is a great option
Aluminum re-inforced strips can be attached with screws (strips are pre-drilled & we provide the screws)
Amount of silicone needed: Varies withe the type of surface to be protected and the degree of adhesion. As a rough estimate, you can generally attach the following numbers with a single 300ml tube:
- Wall Pad - 2 to 3 wall pads per tube
- Edge Corner Strip - 6 to 8 edge corner pads per tube
- Jumbo Corner Guard - 12 to 14 corners per tube
- Post Pad - 1 to 2 post pads per tube. Remember this product fits only 5 inch diameter poles.
Cleaning and maintenance of safety padding: Use non-abrasive cleaners, normal household cleaning solutions. Permanent markers rarely can be removed.Use around water activities is fine. Do not cut or puncturer. Fasten to clean and dry surface. Chlorinated water will cause discoloration as will that with a high TDS rating.
Thanks for your question. Our most popular products for safety proofing are the yellow ones for obvious visual reasons!