Safe-Home.com

Healthier Living | Child Safety | Eco Friendly Tips

Reduce Risks for Employees and Customers from Slippery Floors and Keep Insurance Premiums Lower

by Barbara 31. October 2012 08:39

Question about the need to apply an anti-slip formula like Grip On on concrete and tile floors that are slippery when wet.

Q; " Why do I need to apply an anti-slip formula on the ceramic tile in my auto showroom? I have some indoor outdoor rug strips at the door for people to wipe their feet." Thanks. Warren

Answer: First, common sense says that preventing possible accidents is the best way to act when you have a floor that gets slippery either from moisture from beneath or from floor cleaning machines or feet. Having just returned from a trip to China, I will share my experience in a toll road restroom area. Imagine a huge, as in at least 75 feet by 50 feet area that includes a large tiled entrance plus tile in all the Asian and "American" toilets and in front of all of them. Imagine that all this area is wet with a cleaning solution. Shall I add that I walked very carefully because my feet were sliding? And I was concerned I might slide right into the Asian toilet (at least it was a flush one!).  Secondly, Grip On makes concrete, ceramic, marble, granite, terrazzo, quarry tile, slate, and porcelain tile and bathtubs safer by increasing the coefficient of resistance to slipping and sliding. Yet the treatment is invisible.

Third, read what Safety Seal Products, the manufacturer of Grip On writes:

"Slip/fall accidents are a major problem. The statistics are substantial. After auto accidents, SLIP/FALL ACCIDENTS ARE THE LEADING CAUSE OF INSURANCE LIABILITY PAYMENTS. In addition, slip/fall accidents, paid for by workerscompensation claims, have greatly increased over the last 10 years.A

As a general rule of law, if an owner or possessor of a premises is aware of a dangerous condition, which could foresee ably harm an invitee and if he has been put on notice that there is a means to prevent such harm, then it could be inferred that should an accident result in an invitee being harmed, the possessor, owner of the property, would be charged with having the knowledge to correct the defective or accident-causing condition. As a result, the owner may be held to a higher standard of care and his probabilities of being held liable, and for damage against him are likely to be greater.

This partial description of negligence is an excerpt from a letter from our corporate attorneys explaining in simple language, if the owner or processor of a building has a dangerous situation (i.e., a floor that is slippery when wet) and is aware that there is a product available at a reasonable cost that can deter that accident-causing condition and he fails to use it, he has a greater chance of being held liable."

So if you want to keep employees and customers safe and keep your insurance premiums down, we suggest you treat that flooring and any other unsealed concrete flooring in bathrooms, work areas, etc. with Grip On.  Application is fast. You need a clean floor, grease free that is unsealed. You need a mop, a bucket and clean water plus the Grip On. The application lasts for 1 to 3 years or more depending upon the location. Never wax that floor or seal it.

Grip on is inexpensive. Buy in 4 ounce, 16 ounce, gallon, 5 gallon or barrel containers.

Thanks for your question.

Sincerely,

Barbara

Save Money. Prevent Slip & Fall Accidents. Grip On Sale

by Barbara 24. October 2012 05:30

Question about Grip On Gallon Size Anti-Slip Treatment for Tile, Concrete, Marble, etc. Note: due to overstock of the 1 gallon size, price is reduced through December 31, 2013

Q: " How much coverage do you get from a gallon of Grip On? I have an auto dealership with ceramic tiling in the customer waiting room and show room and am concerned about falls in cold weather or rainy weather? How long does this effect last? Thanks. Steve."

Answer:  This one gallon size (128 Oz.) of Grip On treats about 400 square feet. Reduces the potential of personal injuries, lawsuits and litigation, employee days lost and increased insurance costs. The increased coefficient of friction gained when surfaces are treated (not coated) with Grip On® Anti-Slip Solution is a positive proven safety solution for owners of residential and commercial properties and facilities. The invisible "tread" to increases the coefficient of friction by 100% to 500%. Reapply one per year in heavily traffic areas.

Surfaces treated with Grip On® Anti-Slip Solution are automatically skid and slip resistant when wet or moistened. Use Grip On® Anti-Slip Solution on almost all hard surfaces, such as ceramic tile, glazed brick, marble, polished stone, terrazzo, river rock, concrete, and quarry tile.

Grip On®'s Simple Application Instructions:

    Clean and rinse area.
    Pour Grip On™ on surface.
    Mop or sponge area liberally.
    Let stand for 15 to 20 minutes.
    Rinse off with clean water.
    Area is now ready to use.

After treatment, do not wax. Wax fills in the enhanced read created by the Grip On™ treatment. Reapply every 2 years for bath and shower areas. Reapply every year for traffic areas. 

Thanks for your question.

Sincerely,

Barbara