Safe-Home.com

Healthier Living | Child Safety | Eco Friendly Tips

Window Wedges Made in USA Add Window Safety to Military and Public Housing

by Barbara 27. May 2011 05:33

Question about the Window Wedge Adjustable Velcro Window Stop,144/CS window stop product for slider windows in military housing.

Q: "Our company supplies military installations around the world with safety products. We've been asked to quote on window stops for slider windows for military housing in Asia. Will the Window Wedge work for slider windows? We don't want to install window guards. Thanks. Valerie."

Answer: The Window Wedge fits on the window frame, not in the tracks. Make certain that the window frames are wide enough as Window Wedge® uses one 8 inch velcro strip to which you velcro the 4 inch wedge portion. This product is made in the USA. We asked you to have your customer measure the windows and they are 3/4 inch wide. We recommend that you have two wedges i.e. one package installed on each window. That is because a child pulling on a slider could possibly pull the unit out of the track.

Each window wedge loop strip is 8 inches long and 3/4 inches wide.The actual wedge section is 3.25 inches long.To open the window greater than four inches for cleaning, remove the wedge from the velcro loop portion of the window stopper.

To Install Window Wedge Window Stoppers On a Slider Window:

    Close window. Clean window frame surface before application of loop strip.
    Peel off backing of 8 inch loop strip and place in center of upper horizontal window frame (not on the glass)
    Attach the Window Wedge® to the loop strip with the
    two tines facing the adjacent window section.
    Slide window open until contact is made with the Window Wedge®
    Attach the second Window Wedge® unit to the bottom part of the
    Adjust the position of the Window Wedge® so that the
    window opening is 4 inches or less.
    Note: For maximum child safety, maximum window opening should not exceed 4 inches.

To Install Window Wedge Window Stoppers On a Double Hung or Single Hung Window:

    Close the window
    Clean the surface of the window trim prior to application. Do not attach to glass itself.
    Peel off the backing from the 8 inch loop strip and place in the center of the upper window frame for a double hung or single hung window.
    Attach the Window Wedge® to the loop strip.
    Attach the second window wedge on the other side at the same height.
    Open the window until it is stopped by the window wedge.
    Note: For maximum child safety, maximum window opening should not exceed 4 inches.

Safe Home does offer bulk pricing on this product. Please contact us directly if you need over 144 packages.

Thanks for your question and your purchase!

Sincerely, Barbara

 

Comments