Safe-Home.com

Healthier Living | Child Safety | Eco Friendly Tips

Extending Sensor And Valve Shut Off Wires on FloodStop Water Heater Device

by Barbara 27. March 2013 08:33

Question about the Water Heater FloodStop with 3/4" valve FS3/4NPT and extending the length of the sensor and valve shut-off wires.

Q: "I purchased a Water Heater FloodStop with 3/4" valve FS3/4NPT. How far can the controller be located away from the shut off valve? 25 feet? Can I splice the controller to shut off valve wire and add 20 feet? Can I splice the sensor wire and add 30 feet? Thanks for all your help, Jerry"

Answer: Yes, you can extend the length of both wires. The controller can be located at any distance, so 25 feet is no problem. You can do this by splicing in a similar gauge paired wire as you suggested, or you can purchase our Controller to Valve Extension Wire, which is about 8 feet long. If you ordered 4 of them and simply plugged them into each other, you would not have to go buy wire or do any splicing.

You can splice into the sensor wire and extend it by 30 feet no problem. Or you can add Floodstop Individual Water Appliance Additional Water Sensor XS-01 unitsthat each have a 3 foot long wire and interconnect to give you more water sensor coverage. We do not have a controller to sensor extension wire, as the customized length can be so varied that the manufacturer did not create one.

Thank you for your question. Your question was asked of and answered by Mary Joyce and our distributor. I found it and thought it was a great one to share with others. Extending the sensor and valve shut off wires of all the individual FloodStop automatic water sensor and automatic valve shut off devices can be done in a similar fashion.

Sincerely,

Barbara